Sur 0–100 km/h, A110 Pure 252 gagne (4,55 s vs 4,81 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 840i xDrive G15 | A110 Pure 252 | |
|---|---|---|
| 0–100 km/h | 4,81 s | 4,55 s+0,25 s |
| 400 m standing start | 13,05 s | 12,62 s+0,43 s |
| 1,000 m standing start | 23,65 s | 22,69 s+0,96 s |
| Top speed (electronically limited) | 250 km/h | 277 km/h−27 km/h |
| Power-to-weight ratio | 5,39 kg/hp | 4,31 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 840i xDrive G15 | A110 Pure 252 |
|---|---|---|
| 0–30 km/h | 1,29 s | 1,34 stight gap |
| 0–50 km/h | 2,13 s | 2,24 stight gap |
| 0–80 km/h | 3,54 s | 3,55 stight gap |
| 0–100 km/h | 4,81 s | 4,55 s |
| 0–120 km/h | 6,40 s | 5,87 s |
| 0–160 km/h | 10,71 s | 9,32 s |
| 0–200 km/h | 17,25 s | 14,57 s |
| 400 m standing start | 13,05 s | 12,62 s |
| 1,000 m standing start | 23,65 s | 22,69 s |
| Top speed limited | 250 km/h | 277 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 333 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 795 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 256 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 103 kg | manufacturer kerb weight |
| Drivetrain | A110 Pure 252 | |
| Gearbox | 7-speed dual-clutch |
Off the line, the A110 Pure 252 hits 100 km/h in 4.56 s versus 4.81 s for the Bmw 840i xDrive. Despite the faster sprint time, the Bmw 840i xDrive is 1 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the A110 Pure 252 is doing 151 km/h against 142 km/h for the Bmw 840i xDrive. The gap is 0.17 s. The gap remains stable from the start.
At 400 metres standing start, the A110 Pure 252 crosses the line in 12.61 s versus 13.05 s. The 0.44 s gap represents roughly 21 m of track — two to three car lengths.
Past 400 metres, the A110 Pure 252 continues to build its lead. At 600 metres, it runs at 209 km/h versus 198 km/h. At 1,000 metres, the A110 Pure 252 finishes in 22.69 s versus 23.65 s, with a 0.96 s lead.
Electronically capped at 250 (i.e. 155 mph — industry threshold) km/h, the Bmw 840i xDrive never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor — it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.39 kg/hp vs 4.31 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 7.33 seconds. The 0.25 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, A110 Pure 252 gagne (4,55 s vs 4,81 s).
840i xDrive G15 passe de 0 à 100 km/h en 4,81 secondes (simulation calibrée).
840i xDrive G15 : 333 hp, ratio 5,39 kg/hp. A110 Pure 252 : 256 hp, ratio 4,31 kg/hp.
840i xDrive G15 : 250 km/h. A110 Pure 252 : 277 km/h.