Sur 0–100 km/h, A110 S 292 gagne (3,93 s vs 7,44 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| A110 S 292 | 420i F32 | |
|---|---|---|
| 0–100 km/h | 3,93 s−3,51 s | 7,44 s |
| 400 m standing start | 12,09 s−3,29 s | 15,38 s |
| 1,000 m standing start | 22,16 s−6,07 s | 28,23 s |
| Top speed (electronically limited) | 264 km/h+26 km/h | 238 km/h |
| Power-to-weight ratio | 3,76 kg/hpbetter ratio | 8,29 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | A110 S 292 | 420i F32 |
|---|---|---|
| 0–30 km/h | 1,09 s | 1,42 s |
| 0–50 km/h | 1,83 s | 2,53 s |
| 0–80 km/h | 3,02 s | 5,09 s |
| 0–100 km/h | 3,93 s | 7,44 s |
| 0–120 km/h | 5,26 s | 10,39 s |
| 0–160 km/h | 8,57 s | 19,05 s |
| 0–200 km/h | 13,51 s | 35,17 s |
| 400 m standing start | 12,09 s | 15,38 s |
| 1,000 m standing start | 22,16 s | 28,23 s |
| Top speed | 264 km/h | 238 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 296 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 114 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | 4 cyl |
| Torque | 300 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic transmission |
Off the line, the A110 S 292 hits 100 km/h in 3.93 s versus 7.44 s for the Bmw 420i. At this point, the A110 S 292 leads by 3.51 s and sits roughly 16 m ahead.
At 200 metres, the A110 S 292 is doing 154 km/h against 117 km/h for the Bmw 420i. The gap is 2.03 s. The challenger starts to claw back ground.
At 400 metres standing start, the A110 S 292 crosses the line in 12.08 s versus 15.38 s. The 3.30 s gap represents roughly 126 m of track - a gap visible to the naked eye.
Past 400 metres, the A110 S 292 continues to build its lead. At 600 metres, it runs at 210 km/h versus 163 km/h. At 1,000 metres, the A110 S 292 finishes in 22.15 s versus 28.23 s, with a 6.07 s lead.
Electronically capped at 240 km/h, the Bmw 420i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (3.76 kg/hp vs 8.29 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.15 seconds. The 3.51 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, A110 S 292 gagne (3,93 s vs 7,44 s).
A110 S 292 passe de 0 à 100 km/h en 3,93 secondes (simulation calibrée).
A110 S 292 : 296 hp, ratio 3,76 kg/hp. 420i F32 : 184 hp, ratio 8,29 kg/hp.
A110 S 292 : 264 km/h. 420i F32 : 238 km/h.