Over 0–100 km/h, 128ti F40 wins (6,22 s vs 8,92 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 128ti F40 | 218d xDrive F22 | |
|---|---|---|
| 0–100 km/h | 6,22 s−2,70 s | 8,92 s |
| 400 m standing start | 14,31 s−2,36 s | 16,67 s |
| 1,000 m standing start | 25,38 s−4,71 s | 30,09 s |
| Top speed (electronically limited) | 250 km/h+41 km/h | 209 km/h |
| Power-to-weight ratio | 5,45 kg/hpbetter ratio | 10,13 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 128ti F40 | 218d xDrive F22 |
|---|---|---|
| 0–30 km/h | 1,88 s | 2,34 s |
| 0–50 km/h | 3,14 s | 3,76 s |
| 0–80 km/h | 4,86 s | 6,39 s |
| 0–100 km/h | 6,22 s | 8,92 s |
| 0–120 km/h | 7,95 s | 12,25 s |
| 0–160 km/h | 12,77 s | 22,61 s |
| 0–200 km/h | 20,72 s | 48,45 s |
| 400 m standing start | 14,31 s | 16,67 s |
| 1,000 m standing start | 25,38 s | 30,09 s |
| Top speed limited | 250 km/h | 209 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 265 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 445 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Eight-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 150 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 520 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the Bmw 128ti hits 100 km/h in 6.22 s versus 8.92 s for the Bmw 218d xDrive. At this point, the Bmw 128ti leads by 2.70 s and sits roughly 17 m ahead.
At 200 metres, the Bmw 128ti is doing 136 km/h against 113 km/h for the Bmw 218d xDrive. The gap is 1.40 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 128ti crosses the line in 14.31 s versus 16.67 s. The 2.36 s gap represents roughly 89 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 128ti continues to build its lead. At 600 metres, it runs at 190 km/h versus 157 km/h. At 1,000 metres, the Bmw 128ti finishes in 25.37 s versus 30.09 s, with a 4.71 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 128ti is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 218d xDrive at 209 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.45 kg/hp vs 10.13 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.27 seconds. The 2.70 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 128ti F40 wins (6,22 s vs 8,92 s).
128ti F40 goes from 0 to 100 km/h in 6,22 seconds (calibrated simulation).
128ti F40: 265 hp, ratio 5,45 kg/hp. 218d xDrive F22: 150 hp, ratio 10,13 kg/hp.
128ti F40: 250 km/h. 218d xDrive F22: 209 km/h.