Sur 0–100 km/h, 230i F22 gagne (5,51 s vs 7,38 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 230i F22 | 120d F40 | |
|---|---|---|
| 0–100 km/h | 5,51 s−1,87 s | 7,38 s |
| 400 m standing start | 13,88 s−1,53 s | 15,41 s |
| 1,000 m standing start | 25,28 s−2,62 s | 27,90 s |
| Top speed (electronically limited) | 250 km/h+19 km/h | 231 km/h |
| Power-to-weight ratio | 5,67 kg/hpbetter ratio | 7,63 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 230i F22 | 120d F40 |
|---|---|---|
| 0–30 km/h | 1,42 s | 1,87 s |
| 0–50 km/h | 2,29 s | 3,04 s |
| 0–80 km/h | 3,99 s | 5,29 s |
| 0–100 km/h | 5,51 s | 7,38 s |
| 0–120 km/h | 7,53 s | 9,97 s |
| 0–160 km/h | 13,14 s | 17,66 s |
| 0–200 km/h | 22,07 s | 32,84 s |
| 400 m standing start | 13,88 s | 15,41 s |
| 1,000 m standing start | 25,28 s | 27,90 s |
| Top speed limited | 250 km/h | 231 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 430 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 190 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 450 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed Steptronic transmission |
Off the line, the Bmw 230i hits 100 km/h in 5.51 s versus 7.38 s for the Bmw 120d. At this point, the Bmw 230i leads by 1.87 s and sits roughly 18 m ahead.
At 200 metres, the Bmw 230i is doing 133 km/h against 121 km/h for the Bmw 120d. The gap is 1.10 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 230i crosses the line in 13.87 s versus 15.41 s. The 1.54 s gap represents roughly 63 m of track — a gap visible to the naked eye.
Past 400 metres, the Bmw 230i continues to build its lead. At 600 metres, it runs at 184 km/h versus 168 km/h. At 1,000 metres, the Bmw 230i finishes in 25.28 s versus 27.90 s, with a 2.62 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 230i is capped at 250 (i.e. 155 mph — industry threshold) km/h, the Bmw 120d at 231 km/h. This isn’t a physical engine limit — it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.67 kg/hp vs 7.63 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.54 seconds. The 1.87 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 230i F22 gagne (5,51 s vs 7,38 s).
230i F22 passe de 0 à 100 km/h en 5,51 secondes (simulation calibrée).
230i F22 : 252 hp, ratio 5,67 kg/hp. 120d F40 : 190 hp, ratio 7,63 kg/hp.
230i F22 : 250 km/h. 120d F40 : 231 km/h.