Over 0–100 km/h, 740Le iPerformance G11 wins (5,58 s vs 7,12 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 740Le iPerformance G11 | 120i F20LCI | |
|---|---|---|
| 0–100 km/h | 5,58 s−1,54 s | 7,12 s |
| 400 m standing start | 13,77 s−1,45 s | 15,22 s |
| 1,000 m standing start | 25,05 s−2,48 s | 27,53 s |
| Top speed (electronically limited) | 250 km/h+25 km/h | 225 km/h |
| Power-to-weight ratio | 5,95 kg/hpbetter ratio | 7,47 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 740Le iPerformance G11 | 120i F20LCI |
|---|---|---|
| 0–30 km/h | 1,29 s | 1,79 s |
| 0–50 km/h | 2,14 s | 2,99 s |
| 0–80 km/h | 3,85 s | 5,16 s |
| 0–100 km/h | 5,58 s | 7,12 s |
| 0–120 km/h | 7,52 s | 9,70 s |
| 0–160 km/h | 12,85 s | 16,79 s |
| 0–200 km/h | 21,11 s | 29,61 s |
| 400 m standing start | 13,77 s | 15,22 s |
| 1,000 m standing start | 25,05 s | 27,53 s |
| Top speed limited | 250 km/h | 225 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 326 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 940 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | 4 cyl |
| Torque | 270 Nm | |
| Weight | 1 375 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the Bmw 740Le iPerformance hits 100 km/h in 5.58 s versus 7.12 s for the Bmw 120i. The instant torque of 400 Nm from the electric motor makes the difference. At this point, the Bmw 740Le iPerformance leads by 1.54 s and sits roughly 19 m ahead.
At 200 metres, the Bmw 740Le iPerformance is doing 132 km/h against 122 km/h for the Bmw 120i. The gap is 1.04 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 740Le iPerformance crosses the line in 13.77 s versus 15.22 s. The 1.45 s gap represents roughly 60 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 740Le iPerformance continues to build its lead. At 600 metres, it runs at 186 km/h versus 170 km/h. At 1,000 metres, the Bmw 740Le iPerformance finishes in 25.05 s versus 27.52 s, with a 2.47 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 740Le iPerformance is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 120i at 225 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.27 seconds. The 1.54 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 740Le iPerformance G11 wins (5,58 s vs 7,12 s).
740Le iPerformance G11 goes from 0 to 100 km/h in 5,58 seconds (calibrated simulation).
740Le iPerformance G11: 326 hp, ratio 5,95 kg/hp. 120i F20LCI: 184 hp, ratio 7,47 kg/hp.
740Le iPerformance G11: 250 km/h. 120i F20LCI: 225 km/h.