Over 0–100 km/h, Focus ST 250 Gen3 wins (6,43 s vs 7,12 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| Focus ST 250 Gen3 | 120i F20LCI | |
|---|---|---|
| 0–100 km/h | 6,43 s−0,69 s | 7,12 s |
| 400 m standing start | 14,56 s−0,66 s | 15,22 s |
| 1,000 m standing start | 25,77 s−1,76 s | 27,53 s |
| Top speed (electronically limited) | 254 km/h+29 km/h | 225 km/h |
| Power-to-weight ratio | 5,56 kg/hpbetter ratio | 7,47 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | Focus ST 250 Gen3 | 120i F20LCI |
|---|---|---|
| 0–30 km/h | 1,83 s | 1,79 stight gap |
| 0–50 km/h | 3,06 s | 2,99 stight gap |
| 0–80 km/h | 5,09 s | 5,16 stight gap |
| 0–100 km/h | 6,43 s | 7,12 s |
| 0–120 km/h | 8,42 s | 9,70 s |
| 0–160 km/h | 13,56 s | 16,79 s |
| 0–200 km/h | 21,65 s | 29,61 s |
| 400 m standing start | 14,56 s | 15,22 s |
| 1,000 m standing start | 25,77 s | 27,53 s |
| Top speed | 254 km/h | 225 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 250 hp | Pending |
| Torque | 360 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | 4 cyl |
| Torque | 270 Nm | |
| Weight | 1 375 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the Focus ST 250 Gen3 hits 100 km/h in 6.43 s versus 7.12 s for the Bmw 120i. The 0.69 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the Focus ST 250 Gen3 is doing 134 km/h against 122 km/h for the Bmw 120i. The gap is 0.21 s. The challenger starts to claw back ground.
At 400 metres standing start, the Focus ST 250 Gen3 crosses the line in 14.55 s versus 15.22 s. The 0.67 s gap represents roughly 28 m of track - two to three car lengths.
Past 400 metres, the Focus ST 250 Gen3 continues to build its lead. At 600 metres, it runs at 188 km/h versus 170 km/h. At 1,000 metres, the Focus ST 250 Gen3 finishes in 25.77 s versus 27.52 s, with a 1.75 s lead.
Electronically capped at 225 km/h, the Bmw 120i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.56 kg/hp vs 7.47 kg/hp) and transmission (Manual vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.27 seconds. The 0.69 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, Focus ST 250 Gen3 wins (6,43 s vs 7,12 s).
Focus ST 250 Gen3 goes from 0 to 100 km/h in 6,43 seconds (calibrated simulation).
Focus ST 250 Gen3: 250 hp, ratio 5,56 kg/hp. 120i F20LCI: 184 hp, ratio 7,47 kg/hp.
Focus ST 250 Gen3: 254 km/h. 120i F20LCI: 225 km/h.