Over 0–100 km/h, A110 GT 300 wins (3,92 s vs 6,22 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| A110 GT 300 | 128ti F40 | |
|---|---|---|
| 0–100 km/h | 3,92 s−2,30 s | 6,22 s |
| 400 m standing start | 11,97 s−2,34 s | 14,31 s |
| 1,000 m standing start | 21,76 s−3,62 s | 25,38 s |
| Top speed (electronically limited) | 272 km/h+22 km/h | 250 km/h |
| Power-to-weight ratio | 3,65 kg/hpbetter ratio | 5,45 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | A110 GT 300 | 128ti F40 |
|---|---|---|
| 0–30 km/h | 1,13 s | 1,88 s |
| 0–50 km/h | 1,89 s | 3,14 s |
| 0–80 km/h | 3,06 s | 4,86 s |
| 0–100 km/h | 3,92 s | 6,22 s |
| 0–120 km/h | 5,15 s | 7,95 s |
| 0–160 km/h | 8,21 s | 12,77 s |
| 0–200 km/h | 12,68 s | 20,72 s |
| 400 m standing start | 11,97 s | 14,31 s |
| 1,000 m standing start | 21,76 s | 25,38 s |
| Top speed limited | 272 km/h | 250 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 305 hp | Pending |
| Torque | 340 Nm | |
| Weight | 1 114 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 265 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 445 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Eight-speed Steptronic Sport transmission |
Off the line, the A110 GT 300 hits 100 km/h in 3.92 s versus 6.22 s for the Bmw 128ti. At this point, the A110 GT 300 leads by 2.30 s and sits roughly 22 m ahead.
At 200 metres, the A110 GT 300 is doing 157 km/h against 136 km/h for the Bmw 128ti. The gap is 1.74 s. The challenger starts to claw back ground.
At 400 metres standing start, the A110 GT 300 crosses the line in 11.96 s versus 14.31 s. The 2.34 s gap represents roughly 106 m of track - a gap visible to the naked eye.
Past 400 metres, the A110 GT 300 continues to build its lead. At 600 metres, it runs at 215 km/h versus 190 km/h. At 1,000 metres, the A110 GT 300 finishes in 21.76 s versus 25.37 s, with a 3.62 s lead.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 128ti never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (3.65 kg/hp vs 5.45 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.97 seconds. The 2.30 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, A110 GT 300 wins (3,92 s vs 6,22 s).
A110 GT 300 goes from 0 to 100 km/h in 3,92 seconds (calibrated simulation).
A110 GT 300: 305 hp, ratio 3,65 kg/hp. 128ti F40: 265 hp, ratio 5,45 kg/hp.
A110 GT 300: 272 km/h. 128ti F40: 250 km/h.