Over 0–100 km/h, iX M60 I20 wins (3,71 s vs 3,93 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| iX M60 I20 | A110 S 292 | |
|---|---|---|
| 0–100 km/h | 3,71 s−0,22 s | 3,93 s |
| 400 m standing start | 11,94 s−0,15 s | 12,09 s |
| 1,000 m standing start | 21,85 s−0,31 s | 22,16 s |
| Top speed (electronically limited) | 250 km/h | 264 km/h−14 km/h |
| Power-to-weight ratio | 4,26 kg/hp | 3,76 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | iX M60 I20 | A110 S 292 |
|---|---|---|
| 0–30 km/h | 0,93 s | 1,09 s |
| 0–50 km/h | 1,54 s | 1,83 s |
| 0–80 km/h | 2,67 s | 3,02 s |
| 0–100 km/h | 3,71 s | 3,93 s |
| 0–120 km/h | 5,03 s | 5,26 s |
| 0–160 km/h | 8,60 s | 8,57 stight gap |
| 0–200 km/h | 13,69 s | 13,51 s |
| 400 m standing start | 11,94 s | 12,09 s |
| 1,000 m standing start | 21,85 s | 22,16 s |
| Top speed limited | 250 km/h | 264 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 619 hp | Pending |
| Torque | 1100 Nm | |
| Weight | 2 640 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Single-speed reduction gear |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 296 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 114 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
Off the line, the iX M60 hits 100 km/h in 3.72 s versus 3.93 s for the A110 S 292. The instant torque of 1,100 Nm from the electric motor makes the difference. At this point, the iX M60 leads by 0.22 s and sits roughly 6 m ahead.
At 200 metres, the iX M60 is doing 151 km/h against 154 km/h for the A110 S 292. The gap is 0.19 s. The gap remains stable from the start.
At 400 metres standing start, the iX M60 crosses the line in 11.94 s versus 12.08 s. The 0.15 s gap represents roughly 8 m of track - barely a car length.
Past 400 metres, the iX M60 continues to build its lead. At 600 metres, it runs at 212 km/h versus 210 km/h. At 1,000 metres, the iX M60 finishes in 21.84 s versus 22.15 s, with a 0.31 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 264 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the iX M60 never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 5.94 seconds. The 0.22 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, iX M60 I20 wins (3,71 s vs 3,93 s).
iX M60 I20 goes from 0 to 100 km/h in 3,71 seconds (calibrated simulation).
iX M60 I20: 619 hp, ratio 4,26 kg/hp. A110 S 292: 296 hp, ratio 3,76 kg/hp.
iX M60 I20: 250 km/h. A110 S 292: 264 km/h.