Over 0–100 km/h, S3 Sedan wins (4,63 s vs 8,56 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| S3 Sedan | 118i F20LCI | |
|---|---|---|
| 0–100 km/h | 4,63 s−3,93 s | 8,56 s |
| 400 m standing start | 13,08 s−3,28 s | 16,36 s |
| 1,000 m standing start | 23,69 s−6,06 s | 29,75 s |
| Top speed (electronically limited) | 250 km/h+40 km/h | 210 km/h |
| Power-to-weight ratio | 4,61 kg/hpbetter ratio | 9,56 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | S3 Sedan | 118i F20LCI |
|---|---|---|
| 0–30 km/h | 1,20 s | 1,92 s |
| 0–50 km/h | 2,00 s | 3,28 s |
| 0–80 km/h | 3,37 s | 6,12 s |
| 0–100 km/h | 4,63 s | 8,56 s |
| 0–120 km/h | 6,64 s | 12,16 s |
| 0–160 km/h | 10,96 s | 22,21 s |
| 0–200 km/h | 17,37 s | 47,29 s |
| 400 m standing start | 13,08 s | 16,36 s |
| 1,000 m standing start | 23,69 s | 29,75 s |
| Top speed limited | 250 km/h | 210 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 333 hp | Pending |
| Torque | 420 Nm | |
| Weight | 1 535 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 7-speed S tronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 136 hp | 3 cyl |
| Torque | 220 Nm | |
| Weight | 1 300 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the S3 Sedan hits 100 km/h in 4.63 s versus 8.56 s for the Bmw 118i. At this point, the S3 Sedan leads by 3.93 s and sits roughly 25 m ahead.
At 200 metres, the S3 Sedan is doing 138 km/h against 112 km/h for the Bmw 118i. The gap is 2.17 s. The challenger starts to claw back ground.
At 400 metres standing start, the S3 Sedan crosses the line in 13.08 s versus 16.36 s. The 3.28 s gap represents roughly 121 m of track - a gap visible to the naked eye.
Past 400 metres, the S3 Sedan continues to build its lead. At 600 metres, it runs at 198 km/h versus 157 km/h. At 1,000 metres, the S3 Sedan finishes in 23.69 s versus 29.74 s, with a 6.06 s lead.
Both rivals are electronically governed, but not at the same level: the S3 Sedan is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 118i at 210 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.61 kg/hp vs 9.56 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.05 seconds. The 3.93 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, S3 Sedan wins (4,63 s vs 8,56 s).
S3 Sedan goes from 0 to 100 km/h in 4,63 seconds (calibrated simulation).
S3 Sedan: 333 hp, ratio 4,61 kg/hp. 118i F20LCI: 136 hp, ratio 9,56 kg/hp.
S3 Sedan: 250 km/h. 118i F20LCI: 210 km/h.