Over 0–100 km/h, DS9 E-Tense 250 wins (8,36 s vs 10,58 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| DS9 E-Tense 250 | 116d F20LCI | |
|---|---|---|
| 0–100 km/h | 8,36 s−2,22 s | 10,58 s |
| 400 m standing start | 16,22 s−1,56 s | 17,78 s |
| 1,000 m standing start | 28,57 s−3,42 s | 31,99 s |
| Top speed (electronically limited) | 235 km/h+35 km/h | 200 km/h |
| Power-to-weight ratio | 7,51 kg/hpbetter ratio | 11,77 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | DS9 E-Tense 250 | 116d F20LCI |
|---|---|---|
| 0–30 km/h | 2,40 s | 2,64 s |
| 0–50 km/h | 4,01 s | 4,33 s |
| 0–80 km/h | 6,47 s | 7,52 s |
| 0–100 km/h | 8,36 s | 10,58 s |
| 0–120 km/h | 10,88 s | 14,62 s |
| 0–160 km/h | 18,12 s | 27,94 s |
| 0–200 km/h | 31,70 s | 76,30 s |
| 400 m standing start | 16,22 s | 17,78 s |
| 1,000 m standing start | 28,57 s | 31,99 s |
| Top speed | 235 km/h | 200 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 253 hp | Pending |
| Torque | 520 Nm | |
| Weight | 1 900 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 116 hp | 3 cyl |
| Torque | 270 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the DS9 E-Tense 250 hits 100 km/h in 8.36 s versus 10.58 s for the Bmw 116d. The instant torque of 520 Nm from the electric motor makes the difference. At this point, the DS9 E-Tense 250 leads by 2.22 s and sits roughly 12 m ahead.
At 200 metres, the DS9 E-Tense 250 is doing 121 km/h against 107 km/h for the Bmw 116d. The gap is 0.82 s. The challenger starts to claw back ground.
At 400 metres standing start, the DS9 E-Tense 250 crosses the line in 16.22 s versus 17.78 s. The 1.56 s gap represents roughly 56 m of track - a gap visible to the naked eye.
Past 400 metres, the DS9 E-Tense 250 continues to build its lead. At 600 metres, it runs at 170 km/h versus 148 km/h. At 1,000 metres, the DS9 E-Tense 250 finishes in 28.57 s versus 31.98 s, with a 3.42 s lead.
Electronically capped at 200 km/h, the Bmw 116d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 17.16 seconds. The 2.22 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, DS9 E-Tense 250 wins (8,36 s vs 10,58 s).
DS9 E-Tense 250 goes from 0 to 100 km/h in 8,36 seconds (calibrated simulation).
DS9 E-Tense 250: 253 hp, ratio 7,51 kg/hp. 116d F20LCI: 116 hp, ratio 11,77 kg/hp.
DS9 E-Tense 250: 235 km/h. 116d F20LCI: 200 km/h.