Over 0–100 km/h, 128ti F40 wins (6,27 s vs 8,85 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 128ti F40 | 218d F22 | |
|---|---|---|
| 0–100 km/h | 6,27 s−2,58 s | 8,85 s |
| 400 m standing start | 14,44 s−2,12 s | 16,56 s |
| 1,000 m standing start | 25,87 s−4,26 s | 30,13 s |
| Top speed (electronically limited) | 250 km/h+40 km/h | 210 km/h |
| Power-to-weight ratio | 5,45 kg/hpbetter ratio | 9,63 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 128ti F40 | 218d F22 |
|---|---|---|
| 0–30 km/h | 1,81 s | 2,11 s |
| 0–50 km/h | 3,01 s | 3,45 s |
| 0–80 km/h | 4,76 s | 6,26 s |
| 0–100 km/h | 6,27 s | 8,85 s |
| 0–120 km/h | 8,20 s | 12,29 s |
| 0–160 km/h | 13,63 s | 23,20 s |
| 0–200 km/h | 22,97 s | 53,82 s |
| 400 m standing start | 14,44 s | 16,56 s |
| 1,000 m standing start | 25,87 s | 30,13 s |
| Top speed limited | 250 km/h | 210 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 265 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 445 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 150 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 445 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the Bmw 128ti hits 100 km/h in 6.27 s versus 8.85 s for the Bmw 218d. At this point, the Bmw 128ti leads by 2.58 s and sits roughly 15 m ahead.
At 200 metres, the Bmw 128ti is doing 132 km/h against 112 km/h for the Bmw 218d. The gap is 1.24 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 128ti crosses the line in 14.44 s versus 16.56 s. The 2.12 s gap represents roughly 79 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 128ti continues to build its lead. At 600 metres, it runs at 184 km/h versus 155 km/h. At 1,000 metres, the Bmw 128ti finishes in 25.86 s versus 30.12 s, with a 4.26 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 128ti is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 218d at 210 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.45 kg/hp vs 9.63 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.40 seconds. The 2.58 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, 128ti F40 wins (6,27 s vs 8,85 s).
128ti F40 goes from 0 to 100 km/h in 6,27 seconds (calibrated simulation).
128ti F40: 265 hp, ratio 5,45 kg/hp. 218d F22: 150 hp, ratio 9,63 kg/hp.
128ti F40: 250 km/h. 218d F22: 210 km/h.