Over 0–100 km/h, i3 I01 wins (7,24 s vs 11,08 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| i3 I01 | 216i F44 | |
|---|---|---|
| 0–100 km/h | 7,24 s−3,84 s | 11,08 s |
| 400 m standing start | 15,40 s−2,38 s | 17,78 s |
| 1,000 m standing start | 29,80 s−3,03 s | 32,83 s |
| Top speed (electronically limited) | 150 km/h | 189 km/h−39 km/h |
| Power-to-weight ratio | 7,47 kg/hpbetter ratio | 12,52 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | i3 I01 | 216i F44 |
|---|---|---|
| 0–30 km/h | 1,88 s | 2,03 stight gap |
| 0–50 km/h | 3,14 s | 3,59 s |
| 0–80 km/h | 5,25 s | 7,39 s |
| 0–100 km/h | 7,24 s | 11,08 s |
| 0–120 km/h | 9,85 s | 16,11 s |
| 0–160 km/h | - | 34,47 s |
| 400 m standing start | 15,40 s | 17,78 s |
| 1,000 m standing start | 29,80 s | 32,83 s |
| Top speed | 150 km/h | 189 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 170 hp | Pending |
| Torque | 250 Nm | |
| Weight | 1 270 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Automatic, single-speed with fixed ratio (9.665:1) |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 109 hp | 3 cyl |
| Torque | 190 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual |
Off the line, the i3 hits 100 km/h in 7.24 s versus 11.08 s for the 216i. The instant torque of 250 Nm from the electric motor makes the difference. At this point, the i3 leads by 3.84 s and sits roughly 18 m ahead.
At 200 metres, the i3 is doing 122 km/h against 102 km/h for the 216i. The gap is 1.36 s. The challenger starts to claw back ground.
At 400 metres standing start, the i3 crosses the line in 15.40 s versus 17.78 s. The 2.38 s gap represents roughly 80 m of track - a gap visible to the naked eye.
Past 400 metres, the i3 continues to build its lead. At 600 metres, it runs at 150 km/h versus 140 km/h. At 1,000 metres, the i3 finishes in 29.80 s versus 32.82 s, with a 3.03 s lead. Despite a higher top speed (189 km/h), the 216i never recovers its launch deficit.
Both rivals are electronically governed, but not at the same level: the i3 is capped at 150 km/h, the 216i at 190 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 19.32 seconds. The 3.84 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, i3 I01 wins (7,24 s vs 11,08 s).
i3 I01 goes from 0 to 100 km/h in 7,24 seconds (calibrated simulation).
i3 I01: 170 hp, ratio 7,47 kg/hp. 216i F44: 109 hp, ratio 12,52 kg/hp.
i3 I01: 150 km/h. 216i F44: 189 km/h.