Over 0–100 km/h, 220i F44 and Cooper E FWD are neck and neck (7,12 s vs 7,20 s, no significant gap).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 220i F44 | Cooper E FWD | |
|---|---|---|
| 0–100 km/h | 7,12 s−0,08 s | 7,20 s |
| 400 m standing start | 15,18 s−0,19 s | 15,37 s |
| 1,000 m standing start | 27,79 s−1,14 s | 28,93 s |
| Top speed (electronically limited) | 230 km/h+70 km/h | 160 km/h |
| Power-to-weight ratio | 7,83 kg/hp | 7,58 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 220i F44 | Cooper E FWD |
|---|---|---|
| 0–30 km/h | 1,54 s | 1,96 s |
| 0–50 km/h | 2,60 s | 3,28 s |
| 0–80 km/h | 4,94 s | 5,36 s |
| 0–100 km/h | 7,12 s | 7,20 stight gap |
| 0–120 km/h | 9,82 s | 9,63 s |
| 0–160 km/h | 17,86 s | 17,59 s |
| 0–200 km/h | 33,67 s | - |
| 400 m standing start | 15,18 s | 15,37 s |
| 1,000 m standing start | 27,79 s | 28,93 s |
| Top speed | 230 km/h | 160 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | Pending |
| Torque | 270 Nm | |
| Weight | 1 440 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | Pending |
| Torque | 290 Nm | |
| Weight | 1 395 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Single-speed fixed gear |
Off the line, the Bmw 220i hits 100 km/h in 7.12 s versus 7.20 s for the Cooper E FWD. Despite lacking instant torque, 184 hp of power compensates. The 0.08 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the Bmw 220i is doing 120 km/h against 124 km/h for the Cooper E FWD. The gap is 0.32 s. The gap widens compared to the 0-100.
At 400 metres standing start, the Bmw 220i crosses the line in 15.17 s versus 15.37 s. The 0.20 s gap represents roughly 8 m of track - barely a car length.
Past 400 metres, the Bmw 220i continues to build its lead. At 600 metres, it runs at 167 km/h versus 160 km/h. At 1,000 metres, the Bmw 220i finishes in 27.79 s versus 28.93 s, with a 1.14 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 220i is capped at 230 km/h, the Cooper E FWD at 160 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.45 seconds. The 0.08 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 220i F44 and Cooper E FWD are neck and neck (7,12 s vs 7,20 s, no significant gap).
220i F44 goes from 0 to 100 km/h in 7,12 seconds (calibrated simulation).
220i F44: 184 hp, ratio 7,83 kg/hp. Cooper E FWD: 184 hp, ratio 7,58 kg/hp.
220i F44: 230 km/h. Cooper E FWD: 160 km/h.