Over 0–100 km/h, P7i wins (6,31 s vs 6,54 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| P7i | 225d Convertible F22 | |
|---|---|---|
| 0–100 km/h | 6,31 s−0,23 s | 6,54 s |
| 400 m standing start | 14,57 s−0,19 s | 14,76 s |
| 1,000 m standing start | 26,38 s−0,42 s | 26,80 s |
| Top speed (electronically limited) | 200 km/h | 231 km/h−31 km/h |
| Power-to-weight ratio | 7,18 kg/hpbetter ratio | 7,25 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | P7i | 225d Convertible F22 |
|---|---|---|
| 0–30 km/h | 1,66 s | 1,75 stight gap |
| 0–50 km/h | 2,77 s | 2,84 stight gap |
| 0–80 km/h | 4,62 s | 4,75 stight gap |
| 0–100 km/h | 6,31 s | 6,54 s |
| 0–120 km/h | 8,47 s | 8,83 s |
| 0–160 km/h | 14,90 s | 15,48 s |
| 0–200 km/h | 25,20 s | 27,94 s |
| 400 m standing start | 14,57 s | 14,76 s |
| 1,000 m standing start | 26,38 s | 26,80 s |
| Top speed | 200 km/h | 231 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 282 hp | Permanent Magnet Synchronous Motor |
| Torque | 430 Nm | |
| Weight | 2 025 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 224 hp | 4 cyl |
| Torque | 450 Nm | |
| Weight | 1 625 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the P7i hits 100 km/h in 6.31 s versus 6.54 s for the Bmw 225d Convertible. The instant torque of 430 Nm from the electric motor makes the difference. At this point, the P7i leads by 0.23 s and sits roughly 3 m ahead.
At 200 metres, the P7i is doing 129 km/h against 127 km/h for the Bmw 225d Convertible. The gap is 0.14 s. The gap remains stable from the start.
At 400 metres standing start, the P7i crosses the line in 14.56 s versus 14.76 s. The 0.20 s gap represents roughly 9 m of track - barely a car length.
Past 400 metres, the P7i continues to build its lead. At 600 metres, it runs at 178 km/h versus 175 km/h. At 1,000 metres, the P7i finishes in 26.38 s versus 26.79 s, with a 0.42 s lead. Despite a higher top speed (231 km/h), the Bmw 225d Convertible never recovers its launch deficit.
Both rivals are electronically governed, but not at the same level: the P7i is capped at 200 km/h, the Bmw 225d Convertible at 231 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 10.18 seconds. The 0.23 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, P7i wins (6,31 s vs 6,54 s).
P7i goes from 0 to 100 km/h in 6,31 seconds (calibrated simulation).
P7i: 282 hp, ratio 7,18 kg/hp. 225d Convertible F22: 224 hp, ratio 7,25 kg/hp.
P7i: 200 km/h. 225d Convertible F22: 231 km/h.