Over 0–100 km/h, 740i G11 wins (5,30 s vs 6,56 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 740i G11 | Cooper S FWD | |
|---|---|---|
| 0–100 km/h | 5,30 s−1,25 s | 6,56 s |
| 400 m standing start | 13,53 s−1,09 s | 14,62 s |
| 1,000 m standing start | 24,47 s−1,56 s | 26,03 s |
| Top speed (electronically limited) | 250 km/h | 250 km/h |
| Power-to-weight ratio | 5,49 kg/hpbetter ratio | 5,86 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 740i G11 | Cooper S FWD |
|---|---|---|
| 0–30 km/h | 1,33 s | 1,88 s |
| 0–50 km/h | 2,23 s | 3,14 s |
| 0–80 km/h | 3,81 s | 4,99 s |
| 0–100 km/h | 5,30 s | 6,56 s |
| 0–120 km/h | 7,08 s | 8,41 s |
| 0–160 km/h | 11,95 s | 13,79 s |
| 0–200 km/h | 19,31 s | 22,98 s |
| 400 m standing start | 13,53 s | 14,62 s |
| 1,000 m standing start | 24,47 s | 26,03 s |
| Top speed limited | 250 km/h | 250 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 381 hp | 6 cyl |
| Torque | 540 Nm | |
| Weight | 2 090 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | Pending |
| Torque | 300 Nm | |
| Weight | 1 195 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 7-speed DCT |
Off the line, the Bmw 740i hits 100 km/h in 5.31 s versus 6.56 s for the Cooper S FWD. At this point, the Bmw 740i leads by 1.26 s and sits roughly 20 m ahead.
At 200 metres, the Bmw 740i is doing 137 km/h against 132 km/h for the Cooper S FWD. The gap is 0.93 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 740i crosses the line in 13.53 s versus 14.62 s. The 1.09 s gap represents roughly 49 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 740i continues to build its lead. At 600 metres, it runs at 192 km/h versus 184 km/h. At 1,000 metres, the Bmw 740i finishes in 24.47 s versus 26.02 s, with a 1.56 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 250 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 740i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.49 kg/hp vs 5.86 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.51 seconds. The 1.26 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, 740i G11 wins (5,30 s vs 6,56 s).
740i G11 goes from 0 to 100 km/h in 5,30 seconds (calibrated simulation).
740i G11: 381 hp, ratio 5,49 kg/hp. Cooper S FWD: 204 hp, ratio 5,86 kg/hp.
740i G11: 250 km/h. Cooper S FWD: 250 km/h.