Over 0–100 km/h, 740i G11 wins (5,30 s vs 5,81 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 740i G11 | Model 3 Standard Range Plus | |
|---|---|---|
| 0–100 km/h | 5,30 s−0,50 s | 5,81 s |
| 400 m standing start | 13,53 s−0,74 s | 14,27 s |
| 1,000 m standing start | 24,47 s−2,14 s | 26,61 s |
| Top speed (electronically limited) | 250 km/h+26 km/h | 224 km/h |
| Power-to-weight ratio | 5,49 kg/hpbetter ratio | 7,29 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 740i G11 | Model 3 Standard Range Plus |
|---|---|---|
| 0–30 km/h | 1,33 s | 1,44 stight gap |
| 0–50 km/h | 2,23 s | 2,40 s |
| 0–80 km/h | 3,81 s | 4,14 s |
| 0–100 km/h | 5,30 s | 5,81 s |
| 0–120 km/h | 7,08 s | 8,01 s |
| 0–160 km/h | 11,95 s | 15,57 s |
| 0–200 km/h | 19,31 s | 32,27 s |
| 400 m standing start | 13,53 s | 14,27 s |
| 1,000 m standing start | 24,47 s | 26,61 s |
| Top speed limited | 250 km/h | 224 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 381 hp | 6 cyl |
| Torque | 540 Nm | |
| Weight | 2 090 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 227 hp | Permanent Magnet Synchronous Motor |
| Torque | 449 Nm | |
| Weight | 1 655 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
Off the line, the Bmw 740i hits 100 km/h in 5.31 s versus 5.81 s for the Model 3 Standard Range Plus. Despite lacking instant torque, 381 hp of power compensates. At this point, the Bmw 740i leads by 0.50 s and sits roughly 5 m ahead.
At 200 metres, the Bmw 740i is doing 137 km/h against 129 km/h for the Model 3 Standard Range Plus. The gap is 0.35 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 740i crosses the line in 13.53 s versus 14.26 s. The 0.74 s gap represents roughly 31 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw 740i continues to build its lead. At 600 metres, it runs at 192 km/h versus 171 km/h. At 1,000 metres, the Bmw 740i finishes in 24.47 s versus 26.61 s, with a 2.14 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw 740i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Model 3 Standard Range Plus at 225 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.43 seconds. The 0.50 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 740i G11 wins (5,30 s vs 5,81 s).
740i G11 goes from 0 to 100 km/h in 5,30 seconds (calibrated simulation).
740i G11: 381 hp, ratio 5,49 kg/hp. Model 3 Standard Range Plus: 227 hp, ratio 7,29 kg/hp.
740i G11: 250 km/h. Model 3 Standard Range Plus: 224 km/h.