Over 0–100 km/h, i3 (120 Ah) I01 wins (7,24 s vs 8,65 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| i3 (120 Ah) I01 | 118d F40 | |
|---|---|---|
| 0–100 km/h | 7,24 s−1,41 s | 8,65 s |
| 400 m standing start | 15,40 s−1,01 s | 16,41 s |
| 1,000 m standing start | 29,80 s−0,03 s | 29,83 s |
| Top speed (electronically limited) | 150 km/h | 218 km/h−68 km/h |
| Power-to-weight ratio | 7,47 kg/hpbetter ratio | 9,37 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | i3 (120 Ah) I01 | 118d F40 |
|---|---|---|
| 0–30 km/h | 1,88 s | 2,07 s |
| 0–50 km/h | 3,14 s | 3,39 s |
| 0–80 km/h | 5,25 s | 6,08 s |
| 0–100 km/h | 7,24 s | 8,65 s |
| 0–120 km/h | 9,85 s | 11,98 s |
| 0–160 km/h | - | 22,37 s |
| 0–200 km/h | - | 47,11 s |
| 400 m standing start | 15,40 s | 16,41 s |
| 1,000 m standing start | 29,80 s | 29,83 stight gap |
| Top speed | 150 km/h | 218 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 170 hp | Pending |
| Torque | 250 Nm | |
| Weight | 1 270 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Automatic, single-speed with fixed ratio (9.665:1) |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 150 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 405 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Six-speed manual (8-speed Steptronic transmission) |
Off the line, the Bmw i3 (120 Ah) hits 100 km/h in 7.24 s versus 8.65 s for the Bmw 118d. The instant torque of 250 Nm from the electric motor makes the difference. At this point, the Bmw i3 (120 Ah) leads by 1.41 s and sits roughly 10 m ahead.
At 200 metres, the Bmw i3 (120 Ah) is doing 122 km/h against 113 km/h for the Bmw 118d. The gap is 0.63 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw i3 (120 Ah) crosses the line in 15.40 s versus 16.41 s. The 1.01 s gap represents roughly 39 m of track - a gap visible to the naked eye.
Past 400 metres, the gap narrows. The Bmw i3 (120 Ah) maxes out at 150 km/h while the Bmw 118d keeps accelerating towards 218 km/h. At 600 metres, the gap has dropped to 1.04 s.
At 1,000 metres, the Bmw i3 (120 Ah) finishes in 29.80 s versus 29.82 s, with just 0.03 s to spare. The Bmw 118d fails to fully close the launch gap.
Both rivals are electronically governed, but not at the same level: the Bmw i3 (120 Ah) is capped at 150 km/h, the Bmw 118d at 218 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.03 seconds. The 1.41 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, i3 (120 Ah) I01 wins (7,24 s vs 8,65 s).
i3 (120 Ah) I01 goes from 0 to 100 km/h in 7,24 seconds (calibrated simulation).
i3 (120 Ah) I01: 170 hp, ratio 7,47 kg/hp. 118d F40: 150 hp, ratio 9,37 kg/hp.
i3 (120 Ah) I01: 150 km/h. 118d F40: 218 km/h.