Over 0–100 km/h, iX M60 I20 wins (3,71 s vs 8,59 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| iX M60 I20 | X2 sDrive20d U10 | |
|---|---|---|
| 0–100 km/h | 3,71 s−4,88 s | 8,59 s |
| 400 m standing start | 11,94 s−4,41 s | 16,35 s |
| 1,000 m standing start | 21,85 s−8,15 s | 30,00 s |
| Top speed (electronically limited) | 250 km/h+40 km/h | 210 km/h |
| Power-to-weight ratio | 4,26 kg/hpbetter ratio | 10,03 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | iX M60 I20 | X2 sDrive20d U10 |
|---|---|---|
| 0–30 km/h | 0,93 s | 1,92 s |
| 0–50 km/h | 1,54 s | 3,17 s |
| 0–80 km/h | 2,67 s | 5,91 s |
| 0–100 km/h | 3,71 s | 8,59 s |
| 0–120 km/h | 5,03 s | 12,13 s |
| 0–160 km/h | 8,60 s | 23,42 s |
| 0–200 km/h | 13,69 s | 55,10 s |
| 400 m standing start | 11,94 s | 16,35 s |
| 1,000 m standing start | 21,85 s | 30,00 s |
| Top speed limited | 250 km/h | 210 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 619 hp | Pending |
| Torque | 1100 Nm | |
| Weight | 2 640 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Single-speed reduction gear |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 163 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 635 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Seven-speed Steptronic transmission with double clutch |
Off the line, the iX M60 hits 100 km/h in 3.72 s versus 8.59 s for the Bmw X2 sDrive20d. The instant torque of 1,100 Nm from the electric motor makes the difference. At this point, the iX M60 leads by 4.88 s and sits roughly 28 m ahead.
At 200 metres, the iX M60 is doing 151 km/h against 112 km/h for the Bmw X2 sDrive20d. The gap is 2.92 s. The challenger starts to claw back ground.
At 400 metres standing start, the iX M60 crosses the line in 11.94 s versus 16.35 s. The 4.41 s gap represents roughly 158 m of track - a gap visible to the naked eye.
Past 400 metres, the iX M60 continues to build its lead. At 600 metres, it runs at 212 km/h versus 154 km/h. At 1,000 metres, the iX M60 finishes in 21.84 s versus 29.99 s, with a 8.15 s lead.
The iX M60 features all-wheel drive (AWD) against the Bmw X2 sDrive20d’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the iX M60 is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw X2 sDrive20d at 210 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.32 seconds. The 4.88 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, iX M60 I20 wins (3,71 s vs 8,59 s).
iX M60 I20 goes from 0 to 100 km/h in 3,71 seconds (calibrated simulation).
iX M60 I20: 619 hp, ratio 4,26 kg/hp. X2 sDrive20d U10: 163 hp, ratio 10,03 kg/hp.
iX M60 I20: 250 km/h. X2 sDrive20d U10: 210 km/h.