Over 0–100 km/h, M140i F20LCI wins (4,54 s vs 6,12 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M140i F20LCI | i5 eDrive40 G60 | |
|---|---|---|
| 0–100 km/h | 4,54 s−1,58 s | 6,12 s |
| 400 m standing start | 12,60 s−1,70 s | 14,30 s |
| 1,000 m standing start | 22,65 s−3,22 s | 25,87 s |
| Top speed (electronically limited) | 250 km/h+57 km/h | 193 km/h |
| Power-to-weight ratio | 4,32 kg/hpbetter ratio | 6,81 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M140i F20LCI | i5 eDrive40 G60 |
|---|---|---|
| 0–30 km/h | 1,37 s | 1,79 s |
| 0–50 km/h | 2,25 s | 2,98 s |
| 0–80 km/h | 3,51 s | 4,78 s |
| 0–100 km/h | 4,54 s | 6,12 s |
| 0–120 km/h | 5,82 s | 7,84 s |
| 0–160 km/h | 9,32 s | 13,27 s |
| 0–200 km/h | 14,54 s | - |
| 400 m standing start | 12,60 s | 14,30 s |
| 1,000 m standing start | 22,65 s | 25,87 s |
| Top speed limited | 250 km/h | 193 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 470 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 313 hp | Pending |
| Torque | 400 Nm | |
| Weight | 2 130 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Automatic transmission, single-stage with fixed ratio |
Off the line, the Bmw M140i hits 100 km/h in 4.54 s versus 6.12 s for the Bmw i5 eDrive40. Despite lacking instant torque, 340 hp of power compensates. At this point, the Bmw M140i leads by 1.58 s and sits roughly 16 m ahead.
At 200 metres, the Bmw M140i is doing 151 km/h against 135 km/h for the Bmw i5 eDrive40. The gap is 1.17 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M140i crosses the line in 12.60 s versus 14.29 s. The 1.69 s gap represents roughly 76 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw M140i continues to build its lead. At 600 metres, it runs at 210 km/h versus 186 km/h. At 1,000 metres, the Bmw M140i finishes in 22.65 s versus 25.87 s, with a 3.22 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw M140i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw i5 eDrive40 at 193 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.92 seconds. The 1.58 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, M140i F20LCI wins (4,54 s vs 6,12 s).
M140i F20LCI goes from 0 to 100 km/h in 4,54 seconds (calibrated simulation).
M140i F20LCI: 340 hp, ratio 4,32 kg/hp. i5 eDrive40 G60: 313 hp, ratio 6,81 kg/hp.
M140i F20LCI: 250 km/h. i5 eDrive40 G60: 193 km/h.