Over 0–100 km/h, M240i F22 wins (4,51 s vs 7,32 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M240i F22 | Cooper SE FWD | |
|---|---|---|
| 0–100 km/h | 4,51 s−2,81 s | 7,32 s |
| 400 m standing start | 12,59 s−2,87 s | 15,46 s |
| 1,000 m standing start | 22,59 s−7,27 s | 29,86 s |
| Top speed (electronically limited) | 250 km/h+100 km/h | 150 km/h |
| Power-to-weight ratio | 4,38 kg/hpbetter ratio | 7,42 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M240i F22 | Cooper SE FWD |
|---|---|---|
| 0–30 km/h | 1,42 s | 2,03 s |
| 0–50 km/h | 2,29 s | 3,40 s |
| 0–80 km/h | 3,51 s | 5,51 s |
| 0–100 km/h | 4,51 s | 7,32 s |
| 0–120 km/h | 5,79 s | 9,71 s |
| 0–160 km/h | 9,24 s | - |
| 0–200 km/h | 14,33 s | - |
| 400 m standing start | 12,59 s | 15,46 s |
| 1,000 m standing start | 22,59 s | 29,86 s |
| Top speed limited | 250 km/h | 150 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 490 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | Pending |
| Torque | 270 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Single-speed fixed gear |
Off the line, the Bmw M240i hits 100 km/h in 4.52 s versus 7.32 s for the Cooper SE FWD. Despite lacking instant torque, 340 hp of power compensates. At this point, the Bmw M240i leads by 2.81 s and sits roughly 21 m ahead.
At 200 metres, the Bmw M240i is doing 151 km/h against 124 km/h for the Cooper SE FWD. The gap is 1.90 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M240i crosses the line in 12.59 s versus 15.46 s. The 2.87 s gap represents roughly 116 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw M240i continues to build its lead. At 600 metres, it runs at 211 km/h versus 150 km/h. At 1,000 metres, the Bmw M240i finishes in 22.59 s versus 29.86 s, with a 7.27 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw M240i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Cooper SE FWD at 150 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.21 seconds. The 2.81 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M240i F22 wins (4,51 s vs 7,32 s).
M240i F22 goes from 0 to 100 km/h in 4,51 seconds (calibrated simulation).
M240i F22: 340 hp, ratio 4,38 kg/hp. Cooper SE FWD: 184 hp, ratio 7,42 kg/hp.
M240i F22: 250 km/h. Cooper SE FWD: 150 km/h.