Over 0–100 km/h, M4 F82 wins (4,24 s vs 4,55 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M4 F82 | A110 Pure 252 | |
|---|---|---|
| 0–100 km/h | 4,24 s−0,32 s | 4,55 s |
| 400 m standing start | 12,38 s−0,24 s | 12,62 s |
| 1,000 m standing start | 22,29 s−0,40 s | 22,69 s |
| Top speed (electronically limited) | 250 km/h | 277 km/h−27 km/h |
| Power-to-weight ratio | 3,54 kg/hpbetter ratio | 4,31 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M4 F82 | A110 Pure 252 |
|---|---|---|
| 0–30 km/h | 1,14 s | 1,34 s |
| 0–50 km/h | 1,90 s | 2,24 s |
| 0–80 km/h | 3,25 s | 3,55 s |
| 0–100 km/h | 4,24 s | 4,55 s |
| 0–120 km/h | 5,70 s | 5,87 s |
| 0–160 km/h | 9,14 s | 9,32 s |
| 0–200 km/h | 14,04 s | 14,57 s |
| 400 m standing start | 12,38 s | 12,62 s |
| 1,000 m standing start | 22,29 s | 22,69 s |
| Top speed limited | 250 km/h | 277 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 480 hp | Pending |
| Torque | 550 Nm | |
| Weight | 1 700 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Six-speed manual |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 256 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 103 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
Off the line, the Bmw M4 hits 100 km/h in 4.24 s versus 4.56 s for the A110 Pure 252. At this point, the Bmw M4 leads by 0.32 s and sits roughly 7 m ahead.
At 200 metres, the Bmw M4 is doing 151 km/h against 151 km/h for the A110 Pure 252. The gap is 0.24 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw M4 crosses the line in 12.38 s versus 12.61 s. The 0.23 s gap represents roughly 12 m of track - two to three car lengths.
Past 400 metres, the Bmw M4 continues to build its lead. At 600 metres, it runs at 212 km/h versus 209 km/h. At 1,000 metres, the Bmw M4 finishes in 22.29 s versus 22.69 s, with a 0.40 s lead. Despite a higher top speed (277 km/h), the A110 Pure 252 never recovers its launch deficit.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw M4 never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (3.54 kg/hp vs 4.31 kg/hp) and transmission (Manual vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 6.59 seconds. The 0.32 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, M4 F82 wins (4,24 s vs 4,55 s).
M4 F82 goes from 0 to 100 km/h in 4,24 seconds (calibrated simulation).
M4 F82: 480 hp, ratio 3,54 kg/hp. A110 Pure 252: 256 hp, ratio 4,31 kg/hp.
M4 F82: 250 km/h. A110 Pure 252: 277 km/h.