Sur 0–100 km/h, X1 sDrive20i F48 gagne (7,62 s vs 8,35 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| E-PACE P200 | X1 sDrive20i F48 | |
|---|---|---|
| 0–100 km/h | 8,35 s | 7,62 s+0,73 s |
| 400 m standing start | 16,19 s | 15,60 s+0,59 s |
| 1,000 m standing start | 29,41 s | 28,41 s+1,00 s |
| Top speed (electronically limited) | 215 km/h | 226 km/h−11 km/h |
| Power-to-weight ratio | 8,74 kg/hp | 8,40 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | E-PACE P200 | X1 sDrive20i F48 |
|---|---|---|
| 0–30 km/h | 1,98 s | 1,72 s |
| 0–50 km/h | 3,33 s | 2,92 s |
| 0–80 km/h | 5,88 s | 5,35 s |
| 0–100 km/h | 8,35 s | 7,62 s |
| 0–120 km/h | 11,44 s | 10,50 s |
| 0–160 km/h | 21,17 s | 19,01 s |
| 0–200 km/h | 45,14 s | 36,02 s |
| 400 m standing start | 16,19 s | 15,60 s |
| 1,000 m standing start | 29,41 s | 28,41 s |
| Top speed | 215 km/h | 226 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 200 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 748 kg | manufacturer kerb weight |
| Drivetrain | E-PACE P200 2018 | |
| Gearbox | 9-speed automatic ZF |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 178 hp | Pending |
| Torque | 280 Nm | |
| Weight | 1 495 kg | manufacturer kerb weight |
| Drivetrain | X1 sDrive20i | |
| Gearbox | 7-speed Steptronic with double clutch |
Off the line, the Bmw X1 sDrive20i hits 100 km/h in 7.62 s versus 8.35 s for the E-PACE P200. At this point, the Bmw X1 sDrive20i leads by 0.73 s and sits roughly 10 m ahead.
At 200 metres, the Bmw X1 sDrive20i is doing 118 km/h against 115 km/h for the E-PACE P200. The gap is 0.46 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X1 sDrive20i crosses the line in 15.59 s versus 16.19 s. The 0.59 s gap represents roughly 23 m of track — two to three car lengths.
Past 400 metres, the Bmw X1 sDrive20i continues to build its lead. At 600 metres, it runs at 164 km/h versus 159 km/h. At 1,000 metres, the Bmw X1 sDrive20i finishes in 28.40 s versus 29.41 s, with a 1.01 s lead. Both vehicles have similar top speeds (215 vs 226 km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the E-PACE P200 is capped at 215 km/h, the Bmw X1 sDrive20i at 226 km/h. This isn’t a physical engine limit — it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (8.74 kg/hp vs 8.40 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.46 seconds. The 0.73 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, X1 sDrive20i F48 gagne (7,62 s vs 8,35 s).
E-PACE P200 passe de 0 à 100 km/h en 8,35 secondes (simulation calibrée).
E-PACE P200 : 200 hp, ratio 8,74 kg/hp. X1 sDrive20i F48 : 178 hp, ratio 8,40 kg/hp.
E-PACE P200 : 215 km/h. X1 sDrive20i F48 : 226 km/h.