Sur 0–100 km/h, X3 M40i G01 gagne (4,78 s vs 8,35 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X3 M40i G01 | 218d F22 | |
|---|---|---|
| 0–100 km/h | 4,78 s−3,57 s | 8,35 s |
| 400 m standing start | 13,02 s−3,16 s | 16,18 s |
| 1,000 m standing start | 23,68 s−5,78 s | 29,46 s |
| Top speed (electronically limited) | 250 km/h+37 km/h | 213 km/h |
| Power-to-weight ratio | 5,13 kg/hpbetter ratio | 9,47 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X3 M40i G01 | 218d F22 |
|---|---|---|
| 0–30 km/h | 1,28 s | 1,90 s |
| 0–50 km/h | 2,12 s | 3,16 s |
| 0–80 km/h | 3,53 s | 5,94 s |
| 0–100 km/h | 4,78 s | 8,35 s |
| 0–120 km/h | 6,35 s | 11,66 s |
| 0–160 km/h | 10,65 s | 21,48 s |
| 0–200 km/h | 17,43 s | 44,86 s |
| 400 m standing start | 13,02 s | 16,18 s |
| 1,000 m standing start | 23,68 s | 29,46 s |
| Top speed limited | 250 km/h | 213 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 845 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 150 hp | 4 cyl |
| Torque | 320 Nm | |
| Weight | 1 420 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the Bmw X3 M40i hits 100 km/h in 4.78 s versus 8.35 s for the Bmw 218d. At this point, the Bmw X3 M40i leads by 3.57 s and sits roughly 23 m ahead.
At 200 metres, the Bmw X3 M40i is doing 142 km/h against 114 km/h for the Bmw 218d. The gap is 2.04 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X3 M40i crosses the line in 13.02 s versus 16.17 s. The 3.15 s gap represents roughly 118 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw X3 M40i continues to build its lead. At 600 metres, it runs at 197 km/h versus 158 km/h. At 1,000 metres, the Bmw X3 M40i finishes in 23.67 s versus 29.45 s, with a 5.78 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw X3 M40i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 218d at 213 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.13 kg/hp vs 9.47 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.58 seconds. The 3.57 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, X3 M40i G01 gagne (4,78 s vs 8,35 s).
X3 M40i G01 passe de 0 à 100 km/h en 4,78 secondes (simulation calibrée).
X3 M40i G01 : 360 hp, ratio 5,13 kg/hp. 218d F22 : 150 hp, ratio 9,47 kg/hp.
X3 M40i G01 : 250 km/h. 218d F22 : 213 km/h.