Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 10,38 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | X3 M40i G01 | 116d F40 | Gap |
|---|---|---|---|
| 0–100 km/h | 4.74 s | 10.38 s | 5.65 s · X3 M40i G01 |
| 400 m standing start | 12.98 s | 17.62 s | 4.64 s · X3 M40i G01 |
| 1,000 m standing start | 23.62 s | 31.82 s | 8.20 s · X3 M40i G01 |
| Top speed (electronically limited) | 250 km/h | 200 km/h | 50 km/h · X3 M40i G01 |
| Power-to-weight ratio | 5.19 kg/hp | 11.85 kg/hp | better ratio · X3 M40i G01 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | X3 M40i G01 | 116d F40 |
|---|---|---|
| 0–30 km/h | 1.26 s | 2.52 s |
| 0–50 km/h | 2.08 s | 4.14 s |
| 0–80 km/h | 3.49 s | 7.32 s |
| 0–100 km/h | 4.74 s | 10.38 s |
| 0–120 km/h | 6.30 s | 14.43 s |
| 0–160 km/h | 10.59 s | 27.75 s |
| 0–200 km/h | 17.32 s | 75.90 s |
| 400 m standing start | 12.98 s | 17.62 s |
| 1,000 m standing start | 23.62 s | 31.82 s |
| Top speed limited | 250 km/h | 200 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 870 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 116 hp | 3 cyl |
| Torque | 270 Nm | |
| Weight | 1 375 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Six-speed manual (seven-speed Steptronic dual-clutch transmission) |
Off the line, the X3 M40i hits 100 km/h in 4.74 s versus 10.38 s for the 116d. At this point, the X3 M40i leads by 5.65 s and sits roughly 34 m ahead.
At 200 metres, the X3 M40i is doing 142 km/h against 107 km/h for the 116d. The gap is 3.14 s. The challenger starts to claw back ground.
At 400 metres standing start, the X3 M40i crosses the line in 12.98 s versus 17.61 s. The 4.63 s gap represents roughly 159 m of track - a gap visible to the naked eye.
Past 400 metres, the X3 M40i continues to build its lead. At 600 metres, it runs at 198 km/h versus 148 km/h. At 1,000 metres, the X3 M40i finishes in 23.62 s versus 31.81 s, with a 8.19 s lead.
Both rivals are electronically governed, but not at the same level: the X3 M40i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the 116d at 200 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.19 kg/hp vs 11.85 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 16.96 seconds. The 5.65 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 10,38 s).
X3 M40i G01 goes from 0 to 100 km/h in 4,74 seconds (calibrated simulation).
X3 M40i G01: 360 hp, ratio 5,19 kg/hp. 116d F40: 116 hp, ratio 11,85 kg/hp.
X3 M40i G01: 250 km/h. 116d F40: 200 km/h.