Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 5,58 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | X3 M40i G01 | 740Le iPerformance G11 | Gap |
|---|---|---|---|
| 0–100 km/h | 4.74 s | 5.58 s | 0.84 s · X3 M40i G01 |
| 400 m standing start | 12.98 s | 13.77 s | 0.79 s · X3 M40i G01 |
| 1,000 m standing start | 23.62 s | 25.05 s | 1.43 s · X3 M40i G01 |
| Top speed (electronically limited) | 250 km/h | 250 km/h | Same |
| Power-to-weight ratio | 5.19 kg/hp | 5.95 kg/hp | better ratio · X3 M40i G01 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | X3 M40i G01 | 740Le iPerformance G11 |
|---|---|---|
| 0–30 km/h | 1.26 s · tight gap | 1.29 s |
| 0–50 km/h | 2.08 s · tight gap | 2.14 s |
| 0–80 km/h | 3.49 s | 3.85 s |
| 0–100 km/h | 4.74 s | 5.58 s |
| 0–120 km/h | 6.30 s | 7.52 s |
| 0–160 km/h | 10.59 s | 12.85 s |
| 0–200 km/h | 17.32 s | 21.11 s |
| 400 m standing start | 12.98 s | 13.77 s |
| 1,000 m standing start | 23.62 s | 25.05 s |
| Top speed limited | 250 km/h | 250 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 870 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 326 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 940 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the X3 M40i hits 100 km/h in 4.74 s versus 5.58 s for the 740Le iPerformance. Despite lacking instant torque, 360 hp of power compensates. At this point, the X3 M40i leads by 0.84 s and sits roughly 4 m ahead.
At 200 metres, the X3 M40i is doing 142 km/h against 132 km/h for the 740Le iPerformance. The gap is 0.47 s. The challenger starts to claw back ground.
At 400 metres standing start, the X3 M40i crosses the line in 12.98 s versus 13.77 s. The 0.79 s gap represents roughly 36 m of track - a gap visible to the naked eye.
Past 400 metres, the X3 M40i continues to build its lead. At 600 metres, it runs at 198 km/h versus 186 km/h. At 1,000 metres, the X3 M40i finishes in 23.62 s versus 25.05 s, with a 1.43 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 250 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Both rivals share the same electronic speed cap: the X3 M40i and the 740Le iPerformance are governed to 250 (i.e. 155 mph - industry threshold) km/h. At that speed, standard-fit tyres approach their safety threshold - an industrial ceiling common to most electric vehicles in this segment. Neither car shows its true aerodynamic potential in this duel.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.68 seconds. The 0.84 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 5,58 s).
X3 M40i G01 goes from 0 to 100 km/h in 4,74 seconds (calibrated simulation).
X3 M40i G01: 360 hp, ratio 5,19 kg/hp. 740Le iPerformance G11: 326 hp, ratio 5,95 kg/hp.
X3 M40i G01: 250 km/h. 740Le iPerformance G11: 250 km/h.