Over 0–100 km/h, X4 M40i G02 and SQ2 are neck and neck (4,87 s vs 4,94 s, no significant gap).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X4 M40i G02 | SQ2 | |
|---|---|---|
| 0–100 km/h | 4,87 s−0,08 s | 4,94 s |
| 400 m standing start | 13,08 s−0,39 s | 13,47 s |
| 1,000 m standing start | 23,70 s−0,85 s | 24,55 s |
| Top speed (electronically limited) | 250 km/h | 257 km/h−7 km/h |
| Power-to-weight ratio | 5,18 kg/hp | 5,12 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X4 M40i G02 | SQ2 |
|---|---|---|
| 0–30 km/h | 1,33 s | 1,24 stight gap |
| 0–50 km/h | 2,21 s | 2,07 stight gap |
| 0–80 km/h | 3,62 s | 3,54 stight gap |
| 0–100 km/h | 4,87 s | 4,94 stight gap |
| 0–120 km/h | 6,42 s | 7,19 s |
| 0–160 km/h | 10,68 s | 12,14 s |
| 0–200 km/h | 17,33 s | 19,93 s |
| 400 m standing start | 13,08 s | 13,47 s |
| 1,000 m standing start | 23,70 s | 24,55 s |
| Top speed limited | 250 km/h | 257 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 865 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 300 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 535 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 7-speed S tronic |
Off the line, the Bmw X4 M40i hits 100 km/h in 4.87 s versus 4.94 s for the SQ2. The 0.08 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the Bmw X4 M40i is doing 142 km/h against 133 km/h for the SQ2. The gap is 0.13 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw X4 M40i crosses the line in 13.08 s versus 13.47 s. The 0.39 s gap represents roughly 18 m of track - two to three car lengths.
Past 400 metres, the Bmw X4 M40i continues to build its lead. At 600 metres, it runs at 198 km/h versus 190 km/h. At 1,000 metres, the Bmw X4 M40i finishes in 23.70 s versus 24.55 s, with a 0.85 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 257 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw X4 M40i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.18 kg/hp vs 5.12 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.36 seconds. The 0.08 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, X4 M40i G02 and SQ2 are neck and neck (4,87 s vs 4,94 s, no significant gap).
X4 M40i G02 goes from 0 to 100 km/h in 4,87 seconds (calibrated simulation).
X4 M40i G02: 360 hp, ratio 5,18 kg/hp. SQ2: 300 hp, ratio 5,12 kg/hp.
X4 M40i G02: 250 km/h. SQ2: 257 km/h.