Sur 0–100 km/h, 120i F40 gagne (6,95 s vs 8,36 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| DS9 E-Tense 250 | 120i F40 | |
|---|---|---|
| 0–100 km/h | 8,36 s | 6,95 s+1,41 s |
| 400 m standing start | 16,22 s | 15,05 s+1,17 s |
| 1,000 m standing start | 28,57 s | 27,31 s+1,26 s |
| Top speed (electronically limited) | 235 km/h | 235 km/h |
| Power-to-weight ratio | 7,51 kg/hpbetter ratio | 7,81 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | DS9 E-Tense 250 | 120i F40 |
|---|---|---|
| 0–30 km/h | 2,40 s | 1,65 s |
| 0–50 km/h | 4,01 s | 2,78 s |
| 0–80 km/h | 6,47 s | 4,91 s |
| 0–100 km/h | 8,36 s | 6,95 s |
| 0–120 km/h | 10,88 s | 9,38 s |
| 0–160 km/h | 18,12 s | 16,65 s |
| 0–200 km/h | 31,70 s | 29,52 s |
| 400 m standing start | 16,22 s | 15,05 s |
| 1,000 m standing start | 28,57 s | 27,31 s |
| Top speed | 235 km/h | 235 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 253 hp | Pending |
| Torque | 520 Nm | |
| Weight | 1 900 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 178 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | Seven-speed Steptronic dual-clutch transmission |
Off the line, the Bmw 120i hits 100 km/h in 6.95 s versus 8.36 s for the DS9 E-Tense 250. Despite lacking instant torque, 178 hp of power compensates. At this point, the Bmw 120i leads by 1.41 s and sits roughly 27 m ahead.
At 200 metres, the Bmw 120i is doing 123 km/h against 121 km/h for the DS9 E-Tense 250. The gap is 1.13 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 120i crosses the line in 15.05 s versus 16.22 s. The 1.17 s gap represents roughly 48 m of track — a gap visible to the naked eye.
Past 400 metres, the Bmw 120i continues to build its lead. At 600 metres, it runs at 171 km/h versus 170 km/h. At 1,000 metres, the Bmw 120i finishes in 27.31 s versus 28.57 s, with a 1.26 s lead. Both vehicles have similar top speeds (235 vs 235 km/h), preventing any comeback.
Electronically capped at 235 km/h, the Bmw 120i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor — it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.32 seconds. The 1.41 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 120i F40 gagne (6,95 s vs 8,36 s).
DS9 E-Tense 250 passe de 0 à 100 km/h en 8,36 secondes (simulation calibrée).
DS9 E-Tense 250 : 253 hp, ratio 7,51 kg/hp. 120i F40 : 178 hp, ratio 7,81 kg/hp.
DS9 E-Tense 250 : 235 km/h. 120i F40 : 235 km/h.