Sur 0–100 km/h, X1 sDrive20d F48 gagne (8,03 s vs 8,35 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| E-PACE P200 | X1 sDrive20d F48 | |
|---|---|---|
| 0–100 km/h | 8,35 s | 8,03 s+0,32 s |
| 400 m standing start | 16,19 s | 15,96 s+0,23 s |
| 1,000 m standing start | 29,41 s | 28,77 s+0,64 s |
| Top speed (electronically limited) | 215 km/h | 222 km/h−7 km/h |
| Power-to-weight ratio | 8,74 kg/hp | 8,18 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | E-PACE P200 | X1 sDrive20d F48 |
|---|---|---|
| 0–30 km/h | 1,98 s | 2,11 stight gap |
| 0–50 km/h | 3,33 s | 3,41 stight gap |
| 0–80 km/h | 5,88 s | 5,79 stight gap |
| 0–100 km/h | 8,35 s | 8,03 s |
| 0–120 km/h | 11,44 s | 10,84 s |
| 0–160 km/h | 21,17 s | 19,30 s |
| 0–200 km/h | 45,14 s | 37,62 s |
| 400 m standing start | 16,19 s | 15,96 s |
| 1,000 m standing start | 29,41 s | 28,77 s |
| Top speed | 215 km/h | 222 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 200 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 748 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 9-speed automatic ZF |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 190 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 555 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
Off the line, the Bmw X1 sDrive20d hits 100 km/h in 8.03 s versus 8.35 s for the E-PACE P200. The 0.32 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the Bmw X1 sDrive20d is doing 118 km/h against 115 km/h for the E-PACE P200. The gap is 0.06 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X1 sDrive20d crosses the line in 15.95 s versus 16.19 s. The 0.23 s gap represents roughly 9 m of track - barely a car length.
Past 400 metres, the Bmw X1 sDrive20d continues to build its lead. At 600 metres, it runs at 164 km/h versus 159 km/h. At 1,000 metres, the Bmw X1 sDrive20d finishes in 28.76 s versus 29.41 s, with a 0.65 s lead. Both vehicles have similar top speeds (215 vs 222 km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the E-PACE P200 is capped at 215 km/h, the Bmw X1 sDrive20d at 222 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (8.74 kg/hp vs 8.18 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.46 seconds. The 0.32 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, X1 sDrive20d F48 gagne (8,03 s vs 8,35 s).
E-PACE P200 passe de 0 à 100 km/h en 8,35 secondes (simulation calibrée).
E-PACE P200 : 200 hp, ratio 8,74 kg/hp. X1 sDrive20d F48 : 190 hp, ratio 8,18 kg/hp.
E-PACE P200 : 215 km/h. X1 sDrive20d F48 : 222 km/h.