Over 0–100 km/h, S 580 e 4MATIC W223 wins (4,87 s vs 6,31 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| S 580 e 4MATIC W223 | P7i | |
|---|---|---|
| 0–100 km/h | 4,87 s−1,44 s | 6,31 s |
| 400 m standing start | 12,96 s−1,61 s | 14,57 s |
| 1,000 m standing start | 23,11 s−3,27 s | 26,38 s |
| Top speed (electronically limited) | 250 km/h+50 km/h | 200 km/h |
| Power-to-weight ratio | 4,84 kg/hpbetter ratio | 7,18 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | S 580 e 4MATIC W223 | P7i |
|---|---|---|
| 0–30 km/h | 1,38 s | 1,66 s |
| 0–50 km/h | 2,17 s | 2,77 s |
| 0–80 km/h | 3,58 s | 4,62 s |
| 0–100 km/h | 4,87 s | 6,31 s |
| 0–120 km/h | 6,33 s | 8,47 s |
| 0–160 km/h | 10,27 s | 14,90 s |
| 0–200 km/h | 15,71 s | 25,20 s |
| 400 m standing start | 12,96 s | 14,57 s |
| 1,000 m standing start | 23,11 s | 26,38 s |
| Top speed limited | 250 km/h | 200 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 510 hp | 6 cyl |
| Torque | 750 Nm | |
| Weight | 2 470 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Unknown |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 282 hp | Permanent Magnet Synchronous Motor |
| Torque | 430 Nm | |
| Weight | 2 025 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
Off the line, the S 580 e 4MATIC hits 100 km/h in 4.87 s versus 6.31 s for the P7i. At this point, the S 580 e 4MATIC leads by 1.44 s and sits roughly 14 m ahead.
At 200 metres, the S 580 e 4MATIC is doing 144 km/h against 129 km/h for the P7i. The gap is 1.01 s. The challenger starts to claw back ground.
At 400 metres standing start, the S 580 e 4MATIC crosses the line in 12.95 s versus 14.56 s. The 1.61 s gap represents roughly 69 m of track - a gap visible to the naked eye.
Past 400 metres, the S 580 e 4MATIC continues to build its lead. At 600 metres, it runs at 206 km/h versus 178 km/h. At 1,000 metres, the S 580 e 4MATIC finishes in 23.10 s versus 26.38 s, with a 3.27 s lead.
The S 580 e 4MATIC features all-wheel drive (AWD) against the P7i’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the S 580 e 4MATIC is capped at 250 (i.e. 155 mph - industry threshold) km/h, the P7i at 200 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two plug-in hybrid powertrains, the difference comes down to power-to-weight ratio (4.84 kg/hp vs 7.18 kg/hp) and transmission (Unknown vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.78 seconds. The 1.44 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, S 580 e 4MATIC W223 wins (4,87 s vs 6,31 s).
S 580 e 4MATIC W223 goes from 0 to 100 km/h in 4,87 seconds (calibrated simulation).
S 580 e 4MATIC W223: 510 hp, ratio 4,84 kg/hp. P7i: 282 hp, ratio 7,18 kg/hp.
S 580 e 4MATIC W223: 250 km/h. P7i: 200 km/h.