Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 10,38 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | John Cooper Works FWD | 116d F40 | Gap |
|---|---|---|---|
| 0–100 km/h | 6.21 s | 10.38 s | 4.17 s · John Cooper Works FWD |
| 400 m standing start | 14.26 s | 17.62 s | 3.36 s · John Cooper Works FWD |
| 1,000 m standing start | 25.30 s | 31.82 s | 6.52 s · John Cooper Works FWD |
| Top speed (electronically limited) | 251 km/h | 200 km/h | 51 km/h · John Cooper Works FWD |
| Power-to-weight ratio | 5.09 kg/hp | 11.85 kg/hp | better ratio · John Cooper Works FWD |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | John Cooper Works FWD | 116d F40 |
|---|---|---|
| 0–30 km/h | 1.85 s | 2.52 s |
| 0–50 km/h | 3.09 s | 4.14 s |
| 0–80 km/h | 4.95 s | 7.32 s |
| 0–100 km/h | 6.21 s | 10.38 s |
| 0–120 km/h | 7.93 s | 14.43 s |
| 0–160 km/h | 12.59 s | 27.75 s |
| 0–200 km/h | 20.51 s | 75.90 s |
| 400 m standing start | 14.26 s | 17.62 s |
| 1,000 m standing start | 25.30 s | 31.82 s |
| Top speed | 251 km/h | 200 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 116 hp | 3 cyl |
| Torque | 270 Nm | |
| Weight | 1 375 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Six-speed manual (seven-speed Steptronic dual-clutch transmission) |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 10.38 s for the 116d. At this point, the John Cooper Works FWD leads by 4.17 s and sits roughly 23 m ahead.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 107 km/h for the 116d. The gap is 2.03 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 17.61 s. The 3.35 s gap represents roughly 117 m of track - a gap visible to the naked eye.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 148 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 31.81 s, with a 6.52 s lead.
Electronically capped at 200 km/h, the 116d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 11.85 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 16.96 seconds. The 4.17 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 10,38 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. 116d F40: 116 hp, ratio 11,85 kg/hp.
John Cooper Works FWD: 251 km/h. 116d F40: 200 km/h.