Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 8,56 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| John Cooper Works FWD | 118i F20LCI | |
|---|---|---|
| 0–100 km/h | 6,21 s−2,35 s | 8,56 s |
| 400 m standing start | 14,26 s−2,10 s | 16,36 s |
| 1,000 m standing start | 25,30 s−4,45 s | 29,75 s |
| Top speed (electronically limited) | 251 km/h+41 km/h | 210 km/h |
| Power-to-weight ratio | 5,09 kg/hpbetter ratio | 9,56 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | John Cooper Works FWD | 118i F20LCI |
|---|---|---|
| 0–30 km/h | 1,85 s | 1,92 stight gap |
| 0–50 km/h | 3,09 s | 3,28 s |
| 0–80 km/h | 4,95 s | 6,12 s |
| 0–100 km/h | 6,21 s | 8,56 s |
| 0–120 km/h | 7,93 s | 12,16 s |
| 0–160 km/h | 12,59 s | 22,21 s |
| 0–200 km/h | 20,51 s | 47,29 s |
| 400 m standing start | 14,26 s | 16,36 s |
| 1,000 m standing start | 25,30 s | 29,75 s |
| Top speed | 251 km/h | 210 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 136 hp | 3 cyl |
| Torque | 220 Nm | |
| Weight | 1 300 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual (8-speed Steptronic) |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 8.56 s for the 118i. At this point, the John Cooper Works FWD leads by 2.35 s and sits roughly 9 m ahead.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 112 km/h for the 118i. The gap is 1.08 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 16.36 s. The 2.10 s gap represents roughly 79 m of track - a gap visible to the naked eye.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 157 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 29.74 s, with a 4.45 s lead.
Electronically capped at 210 km/h, the 118i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 9.56 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 14.05 seconds. The 2.35 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 8,56 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. 118i F20LCI: 136 hp, ratio 9,56 kg/hp.
John Cooper Works FWD: 251 km/h. 118i F20LCI: 210 km/h.