Over 0–100 km/h, 230i F44 wins (5,51 s vs 5,76 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | Stelvio Veloce | 230i F44 | Gap |
|---|---|---|---|
| 0–100 km/h | 5.76 s | 5.51 s | 0.25 s · 230i F44 |
| 400 m standing start | 14.12 s | 13.75 s | 0.37 s · 230i F44 |
| 1,000 m standing start | 26.01 s | 25.03 s | 0.98 s · 230i F44 |
| Top speed (electronically limited) | 230 km/h | 250 km/h | 20 km/h · 230i F44 |
| Power-to-weight ratio | 6.59 kg/hp | 5.81 kg/hp | better ratio · 230i F44 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | Stelvio Veloce | 230i F44 |
|---|---|---|
| 0–30 km/h | 1.32 s · tight gap | 1.34 s |
| 0–50 km/h | 2.24 s | 2.23 s · tight gap |
| 0–80 km/h | 4.12 s | 3.93 s |
| 0–100 km/h | 5.76 s | 5.51 s |
| 0–120 km/h | 7.99 s | 7.40 s |
| 0–160 km/h | 14.32 s | 12.69 s |
| 0–200 km/h | 26.33 s | 21.35 s |
| 400 m standing start | 14.12 s | 13.75 s |
| 1,000 m standing start | 26.01 s | 25.03 s |
| Top speed limited | 230 km/h | 250 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 280 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 845 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | Pending |
| Torque | 350 Nm | |
| Weight | 1 465 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic Sport transmission |
Off the line, the 230i hits 100 km/h in 5.51 s versus 5.76 s for the Stelvio Veloce. At this point, the 230i leads by 0.25 s and sits roughly 2 m ahead.
At 200 metres, the 230i is doing 134 km/h against 129 km/h for the Stelvio Veloce. The gap is 0.17 s. The gap remains stable from the start.
At 400 metres standing start, the 230i crosses the line in 13.74 s versus 14.12 s. The 0.38 s gap represents roughly 17 m of track - two to three car lengths.
Past 400 metres, the 230i continues to build its lead. At 600 metres, it runs at 186 km/h versus 177 km/h. At 1,000 metres, the 230i finishes in 25.03 s versus 26.01 s, with a 0.98 s lead.
Both rivals are electronically governed, but not at the same level: the Stelvio Veloce is capped at 230 km/h, the 230i at 250 (i.e. 155 mph - industry threshold) km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (6.59 kg/hp vs 5.81 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.26 seconds. The 0.25 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, 230i F44 wins (5,51 s vs 5,76 s).
Stelvio Veloce goes from 0 to 100 km/h in 5,76 seconds (calibrated simulation).
Stelvio Veloce: 280 hp, ratio 6,59 kg/hp. 230i F44: 252 hp, ratio 5,81 kg/hp.
Stelvio Veloce: 230 km/h. 230i F44: 250 km/h.