Over 0–100 km/h, A290 GT 160kW wins (6,36 s vs 7,44 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | A290 GT 160kW | 420i G22 | Gap |
|---|---|---|---|
| 0–100 km/h | 6.36 s | 7.44 s | 1.08 s · A290 GT 160kW |
| 400 m standing start | 14.65 s | 15.38 s | 0.73 s · A290 GT 160kW |
| 1,000 m standing start | 26.75 s | 28.23 s | 1.48 s · A290 GT 160kW |
| Top speed (electronically limited) | 232 km/h | 238 km/h | 6 km/h · 420i G22 |
| Power-to-weight ratio | 6.78 kg/hp | 8.29 kg/hp | better ratio · A290 GT 160kW |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | A290 GT 160kW | 420i G22 |
|---|---|---|
| 0–30 km/h | 1.76 s | 1.42 s |
| 0–50 km/h | 2.94 s | 2.53 s |
| 0–80 km/h | 4.77 s | 5.09 s |
| 0–100 km/h | 6.36 s | 7.44 s |
| 0–120 km/h | 8.43 s | 10.39 s |
| 0–160 km/h | 15.30 s | 19.05 s |
| 0–200 km/h | 29.20 s | 35.17 s |
| 400 m standing start | 14.65 s | 15.38 s |
| 1,000 m standing start | 26.75 s | 28.23 s |
| Top speed | 232 km/h | 238 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 218 hp | Pending |
| Torque | 300 Nm | |
| Weight | 1 479 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | single-speed reduction |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 184 hp | 4 cyl |
| Torque | 300 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic transmission |
Off the line, the A290 GT 160kW hits 100 km/h in 6.36 s versus 7.44 s for the 420i. The instant torque of 300 Nm from the electric motor makes the difference. Despite the faster sprint time, the 420i is 2 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the A290 GT 160kW is doing 129 km/h against 117 km/h for the 420i. The gap is 0.28 s. The challenger starts to claw back ground.
At 400 metres standing start, the A290 GT 160kW crosses the line in 14.65 s versus 15.38 s. The 0.73 s gap represents roughly 29 m of track - two to three car lengths.
Past 400 metres, the A290 GT 160kW continues to build its lead. At 600 metres, it runs at 174 km/h versus 163 km/h. At 1,000 metres, the A290 GT 160kW finishes in 26.75 s versus 28.23 s, with a 1.48 s lead. Both vehicles have similar top speeds (232 vs 238 km/h), preventing any comeback.
Electronically capped at 240 km/h, the 420i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.15 seconds. The 1.09 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, A290 GT 160kW wins (6,36 s vs 7,44 s).
A290 GT 160kW goes from 0 to 100 km/h in 6,36 seconds (calibrated simulation).
A290 GT 160kW: 218 hp, ratio 6,78 kg/hp. 420i G22: 184 hp, ratio 8,29 kg/hp.
A290 GT 160kW: 232 km/h. 420i G22: 238 km/h.