Over 0–100 km/h, S3 Sedan wins (4,63 s vs 7,35 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | S3 Sedan | ID.3 Pro | Gap |
|---|---|---|---|
| 0–100 km/h | 4.63 s | 7.35 s | 2.72 s · S3 Sedan |
| 400 m standing start | 13.08 s | 15.50 s | 2.42 s · S3 Sedan |
| 1,000 m standing start | 23.69 s | 29.13 s | 5.44 s · S3 Sedan |
| Top speed (electronically limited) | 250 km/h | 160 km/h | 90 km/h · S3 Sedan |
| Power-to-weight ratio | 4.61 kg/hp | 8.82 kg/hp | better ratio · S3 Sedan |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | S3 Sedan | ID.3 Pro |
|---|---|---|
| 0–30 km/h | 1.20 s | 1.88 s |
| 0–50 km/h | 2.00 s | 3.15 s |
| 0–80 km/h | 3.37 s | 5.31 s |
| 0–100 km/h | 4.63 s | 7.35 s |
| 0–120 km/h | 6.64 s | 10.01 s |
| 0–160 km/h | 10.96 s | 18.97 s |
| 0–200 km/h | 17.37 s | - |
| 400 m standing start | 13.08 s | 15.50 s |
| 1,000 m standing start | 23.69 s | 29.13 s |
| Top speed limited | 250 km/h | 160 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 333 hp | Pending |
| Torque | 420 Nm | |
| Weight | 1 535 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 7-speed S tronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | Permanent Magnet Synchronous Motor |
| Torque | 310 Nm | |
| Weight | 1 800 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Single-speed fixed gear |
Off the line, the S3 Sedan hits 100 km/h in 4.63 s versus 7.35 s for the ID.3 Pro. Despite lacking instant torque, 333 hp of power compensates. At this point, the S3 Sedan leads by 2.72 s and sits roughly 24 m ahead.
At 200 metres, the S3 Sedan is doing 138 km/h against 121 km/h for the ID.3 Pro. The gap is 1.65 s. The challenger starts to claw back ground.
At 400 metres standing start, the S3 Sedan crosses the line in 13.08 s versus 15.50 s. The 2.42 s gap represents roughly 96 m of track - a gap visible to the naked eye.
Past 400 metres, the S3 Sedan continues to build its lead. At 600 metres, it runs at 198 km/h versus 160 km/h. At 1,000 metres, the S3 Sedan finishes in 23.69 s versus 29.13 s, with a 5.44 s lead.
The S3 Sedan features all-wheel drive (AWD) against the ID.3 Pro’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the S3 Sedan is capped at 250 (i.e. 155 mph - industry threshold) km/h, the ID.3 Pro at 160 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 11.71 seconds. The 2.72 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, S3 Sedan wins (4,63 s vs 7,35 s).
S3 Sedan goes from 0 to 100 km/h in 4,63 seconds (calibrated simulation).
S3 Sedan: 333 hp, ratio 4,61 kg/hp. ID.3 Pro: 204 hp, ratio 8,82 kg/hp.
S3 Sedan: 250 km/h. ID.3 Pro: 160 km/h.