Over 0–100 km/h, 230i Coupe G42 wins (6,01 s vs 6,27 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 128ti F40 | 230i Coupe G42 | |
|---|---|---|
| 0–100 km/h | 6,27 s | 6,01 s+0,26 s |
| 400 m standing start | 14,44 s | 14,21 s+0,23 s |
| 1,000 m standing start | 25,87 s | 25,54 s+0,33 s |
| Top speed (electronically limited) | 250 km/h | 250 km/h |
| Power-to-weight ratio | 5,45 kg/hpbetter ratio | 6,22 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 128ti F40 | 230i Coupe G42 |
|---|---|---|
| 0–30 km/h | 1,81 s | 1,62 s |
| 0–50 km/h | 3,01 s | 2,70 s |
| 0–80 km/h | 4,76 s | 4,45 s |
| 0–100 km/h | 6,27 s | 6,01 s |
| 0–120 km/h | 8,20 s | 7,95 s |
| 0–160 km/h | 13,63 s | 13,37 s |
| 0–200 km/h | 22,97 s | 22,01 s |
| 400 m standing start | 14,44 s | 14,21 s |
| 1,000 m standing start | 25,87 s | 25,54 s |
| Top speed limited | 250 km/h | 250 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 265 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 445 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 245 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Eight-speed Steptronic transmission |
Off the line, the Bmw 230i Coupe hits 100 km/h in 6.01 s versus 6.27 s for the Bmw 128ti. At this point, the Bmw 230i Coupe leads by 0.26 s and sits roughly 6 m ahead.
At 200 metres, the Bmw 230i Coupe is doing 132 km/h against 132 km/h for the Bmw 128ti. The gap is 0.23 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw 230i Coupe crosses the line in 14.20 s versus 14.44 s. The 0.24 s gap represents roughly 11 m of track - two to three car lengths.
Past 400 metres, the Bmw 230i Coupe continues to build its lead. At 600 metres, it runs at 185 km/h versus 184 km/h. At 1,000 metres, the Bmw 230i Coupe finishes in 25.53 s versus 25.86 s, with a 0.33 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 250 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Both rivals share the same electronic speed cap: the Bmw 128ti and the Bmw 230i Coupe are governed to 250 (i.e. 155 mph - industry threshold) km/h. At that speed, standard-fit tyres approach their safety threshold - an industrial ceiling common to most electric vehicles in this segment. Neither car shows its true aerodynamic potential in this duel.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.45 kg/hp vs 6.22 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.33 seconds. The 0.26 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 230i Coupe G42 wins (6,01 s vs 6,27 s).
128ti F40 goes from 0 to 100 km/h in 6,27 seconds (calibrated simulation).
128ti F40: 265 hp, ratio 5,45 kg/hp. 230i Coupe G42: 245 hp, ratio 6,22 kg/hp.
128ti F40: 250 km/h. 230i Coupe G42: 250 km/h.