Over 0–100 km/h, 230i F44 wins (5,51 s vs 6,21 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 230i F44 | John Cooper Works FWD | |
|---|---|---|
| 0–100 km/h | 5,51 s−0,70 s | 6,21 s |
| 400 m standing start | 13,75 s−0,51 s | 14,26 s |
| 1,000 m standing start | 25,03 s−0,27 s | 25,30 s |
| Top speed (electronically limited) | 250 km/h | 251 km/h−1 km/h |
| Power-to-weight ratio | 5,81 kg/hp | 5,09 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 230i F44 | John Cooper Works FWD |
|---|---|---|
| 0–30 km/h | 1,34 s | 1,85 s |
| 0–50 km/h | 2,23 s | 3,09 s |
| 0–80 km/h | 3,93 s | 4,95 s |
| 0–100 km/h | 5,51 s | 6,21 s |
| 0–120 km/h | 7,40 s | 7,93 s |
| 0–160 km/h | 12,69 s | 12,59 stight gap |
| 0–200 km/h | 21,35 s | 20,51 s |
| 400 m standing start | 13,75 s | 14,26 s |
| 1,000 m standing start | 25,03 s | 25,30 s |
| Top speed limited | 250 km/h | 251 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | Pending |
| Torque | 350 Nm | |
| Weight | 1 465 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
Off the line, the 230i hits 100 km/h in 5.51 s versus 6.21 s for the John Cooper Works FWD. At this point, the 230i leads by 0.70 s and sits roughly 18 m ahead.
At 200 metres, the 230i is doing 134 km/h against 137 km/h for the John Cooper Works FWD. The gap is 0.63 s. The gap remains stable from the start.
At 400 metres standing start, the 230i crosses the line in 13.74 s versus 14.26 s. The 0.52 s gap represents roughly 24 m of track - two to three car lengths.
Past 400 metres, the gap narrows.
At 1,000 metres, the 230i finishes in 25.03 s versus 25.29 s, with just 0.27 s to spare. The John Cooper Works FWD fails to fully close the launch gap.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the 230i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.81 kg/hp vs 5.09 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.88 seconds. The 0.70 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, 230i F44 wins (5,51 s vs 6,21 s).
230i F44 goes from 0 to 100 km/h in 5,51 seconds (calibrated simulation).
230i F44: 252 hp, ratio 5,81 kg/hp. John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp.
230i F44: 250 km/h. John Cooper Works FWD: 251 km/h.