Sur 0–100 km/h, 230i Convertible F22 gagne (5,86 s vs 7,75 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 230i Convertible F22 | 420d Convertible G22 | |
|---|---|---|
| 0–100 km/h | 5,86 s−1,89 s | 7,75 s |
| 400 m standing start | 14,21 s−1,43 s | 15,64 s |
| 1,000 m standing start | 26,01 s−2,68 s | 28,69 s |
| Top speed (electronically limited) | 250 km/h+14 km/h | 236 km/h |
| Power-to-weight ratio | 6,25 kg/hpbetter ratio | 9,34 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 230i Convertible F22 | 420d Convertible G22 |
|---|---|---|
| 0–30 km/h | 1,38 s | 1,52 stight gap |
| 0–50 km/h | 2,29 s | 2,64 s |
| 0–80 km/h | 4,18 s | 5,29 s |
| 0–100 km/h | 5,86 s | 7,75 s |
| 0–120 km/h | 8,10 s | 10,87 s |
| 0–160 km/h | 14,44 s | 20,11 s |
| 0–200 km/h | 24,93 s | 37,54 s |
| 400 m standing start | 14,21 s | 15,64 s |
| 1,000 m standing start | 26,01 s | 28,69 s |
| Top speed limited | 250 km/h | 236 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 252 hp | 4 cyl |
| Torque | 350 Nm | |
| Weight | 1 575 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 190 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 775 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | Eight-speed Steptronic transmission |
Off the line, the Bmw 230i Convertible hits 100 km/h in 5.86 s versus 7.75 s for the Bmw 420d Convertible. At this point, the Bmw 230i Convertible leads by 1.89 s and sits roughly 12 m ahead.
At 200 metres, the Bmw 230i Convertible is doing 129 km/h against 116 km/h for the Bmw 420d Convertible. The gap is 0.88 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw 230i Convertible crosses the line in 14.21 s versus 15.64 s. The 1.43 s gap represents roughly 56 m of track — a gap visible to the naked eye.
Past 400 metres, the Bmw 230i Convertible continues to build its lead. At 600 metres, it runs at 178 km/h versus 161 km/h. At 1,000 metres, the Bmw 230i Convertible finishes in 26.01 s versus 28.69 s, with a 2.68 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph — industry threshold) vs 236 km/h), preventing any comeback.
Both rivals are electronically governed, but not at the same level: the Bmw 230i Convertible is capped at 250 (i.e. 155 mph — industry threshold) km/h, the Bmw 420d Convertible at 236 km/h. This isn’t a physical engine limit — it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (6.25 kg/hp vs 9.34 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.82 seconds. The 1.89 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, 230i Convertible F22 gagne (5,86 s vs 7,75 s).
230i Convertible F22 passe de 0 à 100 km/h en 5,86 secondes (simulation calibrée).
230i Convertible F22 : 252 hp, ratio 6,25 kg/hp. 420d Convertible G22 : 190 hp, ratio 9,34 kg/hp.
230i Convertible F22 : 250 km/h. 420d Convertible G22 : 236 km/h.