Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 6,55 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| 525d G30 | John Cooper Works FWD | |
|---|---|---|
| 0–100 km/h | 6,55 s | 6,21 s+0,34 s |
| 400 m standing start | 14,73 s | 14,26 s+0,47 s |
| 1,000 m standing start | 26,39 s | 25,30 s+1,09 s |
| Top speed (electronically limited) | 250 km/h | 251 km/h−1 km/h |
| Power-to-weight ratio | 6,90 kg/hp | 5,09 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | 525d G30 | John Cooper Works FWD |
|---|---|---|
| 0–30 km/h | 1,87 s | 1,85 stight gap |
| 0–50 km/h | 3,00 s | 3,09 stight gap |
| 0–80 km/h | 4,85 s | 4,95 stight gap |
| 0–100 km/h | 6,55 s | 6,21 s |
| 0–120 km/h | 8,70 s | 7,93 s |
| 0–160 km/h | 14,72 s | 12,59 s |
| 0–200 km/h | 24,52 s | 20,51 s |
| 400 m standing start | 14,73 s | 14,26 s |
| 1,000 m standing start | 26,39 s | 25,30 s |
| Top speed limited | 250 km/h | 251 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | 4 cyl |
| Torque | 500 Nm | |
| Weight | 1 595 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 6.55 s for the Bmw 525d. The 0.34 s gap is negligible: both vehicles are neck and neck.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 129 km/h for the Bmw 525d. The gap is 0.16 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 14.73 s. The 0.47 s gap represents roughly 21 m of track - two to three car lengths.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 180 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 26.39 s, with a 1.10 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 251 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 525d never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (6.90 kg/hp vs 5.09 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.96 seconds. The 0.34 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 6,55 s).
525d G30 goes from 0 to 100 km/h in 6,55 seconds (calibrated simulation).
525d G30: 231 hp, ratio 6,90 kg/hp. John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp.
525d G30: 250 km/h. John Cooper Works FWD: 251 km/h.