Over 0–100 km/h, A110 S 292 wins (3,93 s vs 5,32 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | 740Le xDrive iPerformance G11 | A110 S 292 | Gap |
|---|---|---|---|
| 0–100 km/h | 5.32 s | 3.93 s | 1.39 s · A110 S 292 |
| 400 m standing start | 13.54 s | 12.09 s | 1.45 s · A110 S 292 |
| 1,000 m standing start | 24.73 s | 22.16 s | 2.57 s · A110 S 292 |
| Top speed (electronically limited) | 250 km/h | 264 km/h | 14 km/h · A110 S 292 |
| Power-to-weight ratio | 6.13 kg/hp | 3.76 kg/hp | better ratio · A110 S 292 |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | 740Le xDrive iPerformance G11 | A110 S 292 |
|---|---|---|
| 0–30 km/h | 1.17 s | 1.09 s · tight gap |
| 0–50 km/h | 1.96 s | 1.83 s · tight gap |
| 0–80 km/h | 3.63 s | 3.02 s |
| 0–100 km/h | 5.32 s | 3.93 s |
| 0–120 km/h | 7.19 s | 5.26 s |
| 0–160 km/h | 12.49 s | 8.57 s |
| 0–200 km/h | 20.49 s | 13.51 s |
| 400 m standing start | 13.54 s | 12.09 s |
| 1,000 m standing start | 24.73 s | 22.16 s |
| Top speed limited | 250 km/h | 264 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 326 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 2 000 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 296 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 114 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed dual-clutch |
Off the line, the A110 S 292 hits 100 km/h in 3.93 s versus 5.32 s for the 740Le xDrive iPerformance. Despite lacking instant torque, 296 hp of power compensates. At this point, the A110 S 292 leads by 1.39 s and sits roughly 6 m ahead.
At 200 metres, the A110 S 292 is doing 154 km/h against 134 km/h for the 740Le xDrive iPerformance. The gap is 0.87 s. The challenger starts to claw back ground.
At 400 metres standing start, the A110 S 292 crosses the line in 12.08 s versus 13.54 s. The 1.45 s gap represents roughly 65 m of track - a gap visible to the naked eye.
Past 400 metres, the A110 S 292 continues to build its lead. At 600 metres, it runs at 210 km/h versus 188 km/h. At 1,000 metres, the A110 S 292 finishes in 22.15 s versus 24.72 s, with a 2.57 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 264 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the 740Le xDrive iPerformance never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.34 seconds. The 1.39 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, A110 S 292 wins (3,93 s vs 5,32 s).
740Le xDrive iPerformance G11 goes from 0 to 100 km/h in 5,32 seconds (calibrated simulation).
740Le xDrive iPerformance G11: 326 hp, ratio 6,13 kg/hp. A110 S 292: 296 hp, ratio 3,76 kg/hp.
740Le xDrive iPerformance G11: 250 km/h. A110 S 292: 264 km/h.