Over 0–100 km/h, M3 F80 wins (4,18 s vs 5,30 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M3 F80 | i5 xDrive40 G60 | |
|---|---|---|
| 0–100 km/h | 4,18 s−1,12 s | 5,30 s |
| 400 m standing start | 12,26 s−1,33 s | 13,59 s |
| 1,000 m standing start | 21,95 s−2,63 s | 24,58 s |
| Top speed (electronically limited) | 250 km/h+35 km/h | 215 km/h |
| Power-to-weight ratio | 3,55 kg/hpbetter ratio | 5,79 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M3 F80 | i5 xDrive40 G60 |
|---|---|---|
| 0–30 km/h | 1,20 s | 1,43 s |
| 0–50 km/h | 2,01 s | 2,39 s |
| 0–80 km/h | 3,29 s | 3,92 s |
| 0–100 km/h | 4,18 s | 5,30 s |
| 0–120 km/h | 5,53 s | 7,04 s |
| 0–160 km/h | 8,71 s | 12,04 s |
| 0–200 km/h | 13,11 s | 19,54 s |
| 400 m standing start | 12,26 s | 13,59 s |
| 1,000 m standing start | 21,95 s | 24,58 s |
| Top speed limited | 250 km/h | 215 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 480 hp | Pending |
| Torque | 550 Nm | |
| Weight | 1 705 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | Six-speed manual |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 394 hp | Pending |
| Torque | 590 Nm | |
| Weight | 2 280 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | Automatic transmission, single-stage with fixed ratio |
Off the line, the Bmw M3 hits 100 km/h in 4.18 s versus 5.30 s for the Bmw i5 xDrive40. Despite lacking instant torque, 480 hp of power compensates. At this point, the Bmw M3 leads by 1.12 s and sits roughly 9 m ahead.
At 200 metres, the Bmw M3 is doing 154 km/h against 137 km/h for the Bmw i5 xDrive40. The gap is 0.81 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M3 crosses the line in 12.25 s versus 13.59 s. The 1.34 s gap represents roughly 61 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw M3 continues to build its lead. At 600 metres, it runs at 216 km/h versus 191 km/h. At 1,000 metres, the Bmw M3 finishes in 21.95 s versus 24.58 s, with a 2.63 s lead.
Both rivals are electronically governed, but not at the same level: the Bmw M3 is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw i5 xDrive40 at 215 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.09 seconds. The 1.12 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, M3 F80 wins (4,18 s vs 5,30 s).
M3 F80 goes from 0 to 100 km/h in 4,18 seconds (calibrated simulation).
M3 F80: 480 hp, ratio 3,55 kg/hp. i5 xDrive40 G60: 394 hp, ratio 5,79 kg/hp.
M3 F80: 250 km/h. i5 xDrive40 G60: 215 km/h.