Over 0–100 km/h, M135i xDrive F40 wins (4,78 s vs 5,46 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M135i xDrive F40 | Boxster PDK 987 | |
|---|---|---|
| 0–100 km/h | 4,78 s−0,67 s | 5,46 s |
| 400 m standing start | 13,00 s−0,60 s | 13,60 s |
| 1,000 m standing start | 23,59 s−0,95 s | 24,54 s |
| Top speed (electronically limited) | 250 km/h | 258 km/h−8 km/h |
| Power-to-weight ratio | 4,98 kg/hpbetter ratio | 5,27 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M135i xDrive F40 | Boxster PDK 987 |
|---|---|---|
| 0–30 km/h | 1,33 s | 1,48 s |
| 0–50 km/h | 2,22 s | 2,42 s |
| 0–80 km/h | 3,58 s | 4,00 s |
| 0–100 km/h | 4,78 s | 5,46 s |
| 0–120 km/h | 6,30 s | 7,09 s |
| 0–160 km/h | 10,46 s | 11,75 s |
| 0–200 km/h | 17,07 s | 19,23 s |
| 400 m standing start | 13,00 s | 13,60 s |
| 1,000 m standing start | 23,59 s | 24,54 s |
| Top speed limited | 250 km/h | 258 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 306 hp | 4 cyl |
| Torque | 450 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 259 hp | 6 cyl |
| Torque | 290 Nm | |
| Weight | 1 365 kg | manufacturer kerb weight |
| Drivetrain | Propulsion | |
| Gearbox | DUAL_CLUTCH |
Off the line, the Bmw M135i xDrive hits 100 km/h in 4.78 s versus 5.46 s for the Boxster PDK. At this point, the Bmw M135i xDrive leads by 0.67 s and sits roughly 6 m ahead.
At 200 metres, the Bmw M135i xDrive is doing 144 km/h against 137 km/h for the Boxster PDK. The gap is 0.43 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M135i xDrive crosses the line in 13.00 s versus 13.59 s. The 0.59 s gap represents roughly 28 m of track - two to three car lengths.
Past 400 metres, the Bmw M135i xDrive continues to build its lead. At 600 metres, it runs at 199 km/h versus 193 km/h. At 1,000 metres, the Bmw M135i xDrive finishes in 23.59 s versus 24.54 s, with a 0.95 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 258 km/h), preventing any comeback.
The Bmw M135i xDrive features all-wheel drive (AWD) against the Boxster PDK’s RWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the Bmw M135i xDrive is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Boxster PDK at 261 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.98 kg/hp vs 5.27 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.15 seconds. The 0.67 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M135i xDrive F40 wins (4,78 s vs 5,46 s).
M135i xDrive F40 goes from 0 to 100 km/h in 4,78 seconds (calibrated simulation).
M135i xDrive F40: 306 hp, ratio 4,98 kg/hp. Boxster PDK 987: 259 hp, ratio 5,27 kg/hp.
M135i xDrive F40: 250 km/h. Boxster PDK 987: 258 km/h.