Over 0–100 km/h, M140i F20LCI wins (4,54 s vs 5,76 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | M140i F20LCI | Stelvio Veloce | Gap |
|---|---|---|---|
| 0–100 km/h | 4.54 s | 5.76 s | 1.22 s · M140i F20LCI |
| 400 m standing start | 12.60 s | 14.12 s | 1.52 s · M140i F20LCI |
| 1,000 m standing start | 22.65 s | 26.01 s | 3.36 s · M140i F20LCI |
| Top speed (electronically limited) | 250 km/h | 230 km/h | 20 km/h · M140i F20LCI |
| Power-to-weight ratio | 4.32 kg/hp | 6.59 kg/hp | better ratio · M140i F20LCI |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | M140i F20LCI | Stelvio Veloce |
|---|---|---|
| 0–30 km/h | 1.37 s | 1.32 s · tight gap |
| 0–50 km/h | 2.25 s | 2.24 s · tight gap |
| 0–80 km/h | 3.51 s | 4.12 s |
| 0–100 km/h | 4.54 s | 5.76 s |
| 0–120 km/h | 5.82 s | 7.99 s |
| 0–160 km/h | 9.32 s | 14.32 s |
| 0–200 km/h | 14.54 s | 26.33 s |
| 400 m standing start | 12.60 s | 14.12 s |
| 1,000 m standing start | 22.65 s | 26.01 s |
| Top speed limited | 250 km/h | 230 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 470 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 280 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 845 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 8-speed automatic |
Off the line, the M140i hits 100 km/h in 4.54 s versus 5.76 s for the Stelvio Veloce. At this point, the M140i leads by 1.22 s and sits roughly 4 m ahead.
At 200 metres, the M140i is doing 151 km/h against 129 km/h for the Stelvio Veloce. The gap is 0.78 s. The challenger starts to claw back ground.
At 400 metres standing start, the M140i crosses the line in 12.60 s versus 14.12 s. The 1.52 s gap represents roughly 65 m of track - a gap visible to the naked eye.
Past 400 metres, the M140i continues to build its lead. At 600 metres, it runs at 210 km/h versus 177 km/h. At 1,000 metres, the M140i finishes in 22.65 s versus 26.01 s, with a 3.36 s lead.
Both rivals are electronically governed, but not at the same level: the M140i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Stelvio Veloce at 230 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.32 kg/hp vs 6.59 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.26 seconds. The 1.22 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M140i F20LCI wins (4,54 s vs 5,76 s).
M140i F20LCI goes from 0 to 100 km/h in 4,54 seconds (calibrated simulation).
M140i F20LCI: 340 hp, ratio 4,32 kg/hp. Stelvio Veloce: 280 hp, ratio 6,59 kg/hp.
M140i F20LCI: 250 km/h. Stelvio Veloce: 230 km/h.