Over 0–100 km/h, M140i xDrive F20LCI wins (4,43 s vs 7,79 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | M140i xDrive F20LCI | A5 Sedan | Gap |
|---|---|---|---|
| 0–100 km/h | 4.43 s | 7.79 s | 3.36 s · M140i xDrive F20LCI |
| 400 m standing start | 12.64 s | 15.74 s | 3.10 s · M140i xDrive F20LCI |
| 1,000 m standing start | 23.01 s | 28.63 s | 5.62 s · M140i xDrive F20LCI |
| Top speed (electronically limited) | 250 km/h | 242 km/h | 8 km/h · M140i xDrive F20LCI |
| Power-to-weight ratio | 4.53 kg/hp | 8.92 kg/hp | better ratio · M140i xDrive F20LCI |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | M140i xDrive F20LCI | A5 Sedan |
|---|---|---|
| 0–30 km/h | 1.21 s | 1.83 s |
| 0–50 km/h | 2.00 s | 3.04 s |
| 0–80 km/h | 3.29 s | 5.46 s |
| 0–100 km/h | 4.43 s | 7.79 s |
| 0–120 km/h | 5.86 s | 10.74 s |
| 0–160 km/h | 9.81 s | 19.81 s |
| 0–200 km/h | 15.81 s | 34.87 s |
| 400 m standing start | 12.64 s | 15.74 s |
| 1,000 m standing start | 23.01 s | 28.63 s |
| Top speed limited | 250 km/h | 242 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 540 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 204 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 820 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 7-speed S tronic |
Off the line, the M140i xDrive hits 100 km/h in 4.43 s versus 7.79 s for the A5 Sedan. At this point, the M140i xDrive leads by 3.36 s and sits roughly 22 m ahead.
At 200 metres, the M140i xDrive is doing 147 km/h against 117 km/h for the A5 Sedan. The gap is 2.02 s. The challenger starts to claw back ground.
At 400 metres standing start, the M140i xDrive crosses the line in 12.64 s versus 15.74 s. The 3.09 s gap represents roughly 119 m of track - a gap visible to the naked eye.
Past 400 metres, the M140i xDrive continues to build its lead. At 600 metres, it runs at 203 km/h versus 162 km/h. At 1,000 metres, the M140i xDrive finishes in 23.01 s versus 28.62 s, with a 5.62 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 242 km/h), preventing any comeback.
The M140i xDrive features all-wheel drive (AWD) against the A5 Sedan’s FWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the M140i xDrive is capped at 250 (i.e. 155 mph - industry threshold) km/h, the A5 Sedan at 242 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.53 kg/hp vs 8.92 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.41 seconds. The 3.36 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M140i xDrive F20LCI wins (4,43 s vs 7,79 s).
M140i xDrive F20LCI goes from 0 to 100 km/h in 4,43 seconds (calibrated simulation).
M140i xDrive F20LCI: 340 hp, ratio 4,53 kg/hp. A5 Sedan: 204 hp, ratio 8,92 kg/hp.
M140i xDrive F20LCI: 250 km/h. A5 Sedan: 242 km/h.