Over 0–100 km/h, M140i xDrive F20LCI wins (4,43 s vs 6,43 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M140i xDrive F20LCI | Focus ST 250 Gen3 | |
|---|---|---|
| 0–100 km/h | 4,43 s−2,00 s | 6,43 s |
| 400 m standing start | 12,64 s−1,92 s | 14,56 s |
| 1,000 m standing start | 23,01 s−2,76 s | 25,77 s |
| Top speed (electronically limited) | 250 km/h | 254 km/h−4 km/h |
| Power-to-weight ratio | 4,53 kg/hpbetter ratio | 5,56 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M140i xDrive F20LCI | Focus ST 250 Gen3 |
|---|---|---|
| 0–30 km/h | 1,21 s | 1,83 s |
| 0–50 km/h | 2,00 s | 3,06 s |
| 0–80 km/h | 3,29 s | 5,09 s |
| 0–100 km/h | 4,43 s | 6,43 s |
| 0–120 km/h | 5,86 s | 8,42 s |
| 0–160 km/h | 9,81 s | 13,56 s |
| 0–200 km/h | 15,81 s | 21,65 s |
| 400 m standing start | 12,64 s | 14,56 s |
| 1,000 m standing start | 23,01 s | 25,77 s |
| Top speed limited | 250 km/h | 254 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 540 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 250 hp | Pending |
| Torque | 360 Nm | |
| Weight | 1 390 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 6-speed manual |
Off the line, the M140i xDrive hits 100 km/h in 4.43 s versus 6.43 s for the Focus ST 250 Gen3. At this point, the M140i xDrive leads by 2.00 s and sits roughly 22 m ahead.
At 200 metres, the M140i xDrive is doing 147 km/h against 134 km/h for the Focus ST 250 Gen3. The gap is 1.52 s. The challenger starts to claw back ground.
At 400 metres standing start, the M140i xDrive crosses the line in 12.64 s versus 14.55 s. The 1.91 s gap represents roughly 85 m of track - a gap visible to the naked eye.
Past 400 metres, the M140i xDrive continues to build its lead. At 600 metres, it runs at 203 km/h versus 188 km/h. At 1,000 metres, the M140i xDrive finishes in 23.01 s versus 25.77 s, with a 2.76 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 254 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the M140i xDrive never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.53 kg/hp vs 5.56 kg/hp) and transmission (Automatic vs Manual).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 9.42 seconds. The 2.00 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, M140i xDrive F20LCI wins (4,43 s vs 6,43 s).
M140i xDrive F20LCI goes from 0 to 100 km/h in 4,43 seconds (calibrated simulation).
M140i xDrive F20LCI: 340 hp, ratio 4,53 kg/hp. Focus ST 250 Gen3: 250 hp, ratio 5,56 kg/hp.
M140i xDrive F20LCI: 250 km/h. Focus ST 250 Gen3: 254 km/h.