Sur 0–100 km/h, M240i F44 gagne (4,67 s vs 5,68 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M240i F44 | Focus ST 280 | |
|---|---|---|
| 0–100 km/h | 4,67 s−1,01 s | 5,68 s |
| 400 m standing start | 12,78 s−1,02 s | 13,80 s |
| 1,000 m standing start | 23,04 s−1,60 s | 24,64 s |
| Top speed (electronically limited) | 250 km/h | 264 km/h−14 km/h |
| Power-to-weight ratio | 4,49 kg/hpbetter ratio | 5,11 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M240i F44 | Focus ST 280 |
|---|---|---|
| 0–30 km/h | 1,33 s | 1,66 s |
| 0–50 km/h | 2,21 s | 2,77 s |
| 0–80 km/h | 3,53 s | 4,37 s |
| 0–100 km/h | 4,67 s | 5,68 s |
| 0–120 km/h | 6,03 s | 7,28 s |
| 0–160 km/h | 9,80 s | 11,78 s |
| 0–200 km/h | 15,53 s | 19,05 s |
| 400 m standing start | 12,78 s | 13,80 s |
| 1,000 m standing start | 23,04 s | 24,64 s |
| Top speed limited | 250 km/h | 264 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 340 hp | Pending |
| Torque | 500 Nm | |
| Weight | 1 525 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 8-speed Steptronic Sport transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 280 hp | Pending |
| Torque | 420 Nm | |
| Weight | 1 431 kg | manufacturer kerb weight |
| Drivetrain | — | |
| Gearbox | 7-speed dual-clutch |
Off the line, the Bmw M240i hits 100 km/h in 4.67 s versus 5.68 s for the Focus ST 280. At this point, the Bmw M240i leads by 1.01 s and sits roughly 13 m ahead.
At 200 metres, the Bmw M240i is doing 147 km/h against 139 km/h for the Focus ST 280. The gap is 0.77 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw M240i crosses the line in 12.78 s versus 13.79 s. The 1.02 s gap represents roughly 48 m of track — a gap visible to the naked eye.
Past 400 metres, the Bmw M240i continues to build its lead. At 600 metres, it runs at 205 km/h versus 194 km/h. At 1,000 metres, the Bmw M240i finishes in 23.03 s versus 24.63 s, with a 1.60 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph — industry threshold) vs 264 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph — industry threshold) km/h, the Bmw M240i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor — it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.49 kg/hp vs 5.11 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.27 seconds. The 1.01 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Sur 0–100 km/h, M240i F44 gagne (4,67 s vs 5,68 s).
M240i F44 passe de 0 à 100 km/h en 4,67 secondes (simulation calibrée).
M240i F44 : 340 hp, ratio 4,49 kg/hp. Focus ST 280 : 280 hp, ratio 5,11 kg/hp.
M240i F44 : 250 km/h. Focus ST 280 : 264 km/h.