Over 0–100 km/h, M440i G22 wins (4,83 s vs 4,94 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| M440i G22 | SQ2 | |
|---|---|---|
| 0–100 km/h | 4,83 s−0,12 s | 4,94 s |
| 400 m standing start | 12,93 s−0,54 s | 13,47 s |
| 1,000 m standing start | 23,15 s−1,40 s | 24,55 s |
| Top speed (electronically limited) | 250 km/h | 257 km/h−7 km/h |
| Power-to-weight ratio | 4,53 kg/hpbetter ratio | 5,12 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | M440i G22 | SQ2 |
|---|---|---|
| 0–30 km/h | 1,39 s | 1,24 s |
| 0–50 km/h | 2,31 s | 2,07 s |
| 0–80 km/h | 3,68 s | 3,54 stight gap |
| 0–100 km/h | 4,83 s | 4,94 stight gap |
| 0–120 km/h | 6,24 s | 7,19 s |
| 0–160 km/h | 10,05 s | 12,14 s |
| 0–200 km/h | 15,69 s | 19,93 s |
| 400 m standing start | 12,93 s | 13,47 s |
| 1,000 m standing start | 23,15 s | 24,55 s |
| Top speed limited | 250 km/h | 257 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 374 hp | Pending |
| Torque | 500 Nm | |
| Weight | 1 695 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 300 hp | Pending |
| Torque | 400 Nm | |
| Weight | 1 535 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 7-speed S tronic |
Off the line, the Bmw M440i hits 100 km/h in 4.83 s versus 4.94 s for the SQ2. Despite the faster sprint time, the SQ2 is 4 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the Bmw M440i is doing 146 km/h against 133 km/h for the SQ2. The gap is 0.16 s. The gap remains stable from the start.
At 400 metres standing start, the Bmw M440i crosses the line in 12.93 s versus 13.47 s. The 0.54 s gap represents roughly 25 m of track - two to three car lengths.
Past 400 metres, the Bmw M440i continues to build its lead. At 600 metres, it runs at 205 km/h versus 190 km/h. At 1,000 metres, the Bmw M440i finishes in 23.15 s versus 24.55 s, with a 1.40 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 257 km/h), preventing any comeback.
Electronically capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw M440i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.53 kg/hp vs 5.12 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.36 seconds. The 0.12 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, M440i G22 wins (4,83 s vs 4,94 s).
M440i G22 goes from 0 to 100 km/h in 4,83 seconds (calibrated simulation).
M440i G22: 374 hp, ratio 4,53 kg/hp. SQ2: 300 hp, ratio 5,12 kg/hp.
M440i G22: 250 km/h. SQ2: 257 km/h.