Over 0–100 km/h, X6 M50i G06 wins (4,25 s vs 8,42 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| X6 M50i G06 | 220d Active Tourer G42 | |
|---|---|---|
| 0–100 km/h | 4,25 s−4,17 s | 8,42 s |
| 400 m standing start | 12,30 s−3,97 s | 16,27 s |
| 1,000 m standing start | 22,14 s−7,38 s | 29,52 s |
| Top speed (electronically limited) | 250 km/h+30 km/h | 220 km/h |
| Power-to-weight ratio | 4,23 kg/hpbetter ratio | 9,60 kg/hp |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | X6 M50i G06 | 220d Active Tourer G42 |
|---|---|---|
| 0–30 km/h | 1,25 s | 2,09 s |
| 0–50 km/h | 2,06 s | 3,39 s |
| 0–80 km/h | 3,27 s | 5,95 s |
| 0–100 km/h | 4,25 s | 8,42 s |
| 0–120 km/h | 5,46 s | 11,64 s |
| 0–160 km/h | 8,75 s | 21,49 s |
| 0–200 km/h | 13,66 s | 43,09 s |
| 400 m standing start | 12,30 s | 16,27 s |
| 1,000 m standing start | 22,14 s | 29,52 s |
| Top speed limited | 250 km/h | 220 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 530 hp | 8 cyl |
| Torque | 750 Nm | |
| Weight | 2 240 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Eight-speed Steptronic transmission |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 163 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 565 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Seven-speed Steptronic dual-clutch transmission |
Off the line, the Bmw X6 M50i hits 100 km/h in 4.26 s versus 8.42 s for the Bmw 220d Active Tourer. At this point, the Bmw X6 M50i leads by 4.17 s and sits roughly 24 m ahead.
At 200 metres, the Bmw X6 M50i is doing 154 km/h against 115 km/h for the Bmw 220d Active Tourer. The gap is 2.55 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X6 M50i crosses the line in 12.29 s versus 16.26 s. The 3.97 s gap represents roughly 147 m of track - a gap visible to the naked eye.
Past 400 metres, the Bmw X6 M50i continues to build its lead. At 600 metres, it runs at 214 km/h versus 159 km/h. At 1,000 metres, the Bmw X6 M50i finishes in 22.14 s versus 29.52 s, with a 7.38 s lead.
The Bmw X6 M50i features all-wheel drive (AWD) against the Bmw 220d Active Tourer’s FWD. At low speeds (0-30, 0-50, 0-80 km/h), AWD doubles the driven contact area: all four wheels transmit torque to the road, virtually eliminating wheelspin at launch. This traction advantage is decisive in the range where the motor delivers peak torque, before power and aerodynamics take over.
Both rivals are electronically governed, but not at the same level: the Bmw X6 M50i is capped at 250 (i.e. 155 mph - industry threshold) km/h, the Bmw 220d Active Tourer at 220 km/h. This isn’t a physical engine limit - it’s a manufacturer choice, usually for tyre safety or homologation reasons. Neither car reaches its true aerodynamic top speed.
With two combustion powertrains, the difference comes down to power-to-weight ratio (4.23 kg/hp vs 9.60 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.60 seconds. The 4.17 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, X6 M50i G06 wins (4,25 s vs 8,42 s).
X6 M50i G06 goes from 0 to 100 km/h in 4,25 seconds (calibrated simulation).
X6 M50i G06: 530 hp, ratio 4,23 kg/hp. 220d Active Tourer G42: 163 hp, ratio 9,60 kg/hp.
X6 M50i G06: 250 km/h. 220d Active Tourer G42: 220 km/h.