Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 5,30 s).
Performance comparison
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
Simulation
Calibration
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
| E 400 e 4MATIC W214 | X3 M40i G01 | |
|---|---|---|
| 0–100 km/h | 5,30 s | 4,74 s+0,57 s |
| 400 m standing start | 13,57 s | 12,98 s+0,59 s |
| 1,000 m standing start | 24,58 s | 23,62 s+0,96 s |
| Top speed (electronically limited) | 250 km/h | 250 km/h |
| Power-to-weight ratio | 5,89 kg/hp | 5,19 kg/hpbetter ratio |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
Simulated performance at each stage. Winner in green.
| Palier | E 400 e 4MATIC W214 | X3 M40i G01 |
|---|---|---|
| 0–30 km/h | 1,36 s | 1,26 stight gap |
| 0–50 km/h | 2,06 s | 2,08 stight gap |
| 0–80 km/h | 3,74 s | 3,49 s |
| 0–100 km/h | 5,30 s | 4,74 s |
| 0–120 km/h | 7,13 s | 6,30 s |
| 0–160 km/h | 12,19 s | 10,59 s |
| 0–200 km/h | 19,66 s | 17,32 s |
| 400 m standing start | 13,57 s | 12,98 s |
| 1,000 m standing start | 24,58 s | 23,62 s |
| Top speed limited | 250 km/h | 250 km/h |
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 381 hp | 4 cyl |
| Torque | 650 Nm | |
| Weight | 2 245 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | Unknown |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 360 hp | 6 cyl |
| Torque | 500 Nm | |
| Weight | 1 870 kg | manufacturer kerb weight |
| Drivetrain | Integrale (AWD) | |
| Gearbox | 8-speed Steptronic |
Off the line, the Bmw X3 M40i hits 100 km/h in 4.74 s versus 5.31 s for the E 400 e 4MATIC. Despite lacking instant torque, 360 hp of power compensates. At this point, the Bmw X3 M40i leads by 0.57 s and sits roughly 4 m ahead.
At 200 metres, the Bmw X3 M40i is doing 142 km/h against 135 km/h for the E 400 e 4MATIC. The gap is 0.36 s. The challenger starts to claw back ground.
At 400 metres standing start, the Bmw X3 M40i crosses the line in 12.98 s versus 13.57 s. The 0.59 s gap represents roughly 27 m of track - two to three car lengths.
Past 400 metres, the Bmw X3 M40i continues to build its lead. At 600 metres, it runs at 198 km/h versus 190 km/h. At 1,000 metres, the Bmw X3 M40i finishes in 23.62 s versus 24.58 s, with a 0.96 s lead. Both vehicles have similar top speeds (250 (i.e. 155 mph - industry threshold) vs 250 (i.e. 155 mph - industry threshold) km/h), preventing any comeback.
Both rivals share the same electronic speed cap: the E 400 e 4MATIC and the Bmw X3 M40i are governed to 250 (i.e. 155 mph - industry threshold) km/h. At that speed, standard-fit tyres approach their safety threshold - an industrial ceiling common to most electric vehicles in this segment. Neither car shows its true aerodynamic potential in this duel.
Instant electric torque gives an advantage off the line. The higher top speed of the combustion engine gives an advantage over longer distances. The distance at which one catches the other depends on the top speed differential.
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 8.31 seconds. The 0.57 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, X3 M40i G01 wins (4,74 s vs 5,30 s).
E 400 e 4MATIC W214 goes from 0 to 100 km/h in 5,30 seconds (calibrated simulation).
E 400 e 4MATIC W214: 381 hp, ratio 5,89 kg/hp. X3 M40i G01: 360 hp, ratio 5,19 kg/hp.
E 400 e 4MATIC W214: 250 km/h. X3 M40i G01: 250 km/h.