Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 8,42 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
6.21 s
8.42 s
| Measure | John Cooper Works FWD | 220d Active Tourer G42 | Gap |
|---|---|---|---|
| 0–100 km/h | 6.21 s | 8.42 s | 2.21 s · John Cooper Works FWD |
| 400 m standing start | 14.26 s | 16.27 s | 2.01 s · John Cooper Works FWD |
| 1,000 m standing start | 25.30 s | 29.52 s | 4.22 s · John Cooper Works FWD |
| Top speed (electronically limited) | 251 km/h | 220 km/h | 31 km/h · John Cooper Works FWD |
| Power-to-weight ratio | 5.09 kg/hp | 9.60 kg/hp | better ratio · John Cooper Works FWD |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | John Cooper Works FWD | 220d Active Tourer G42 |
|---|---|---|
| 0–30 km/h | 1.85 s | 2.09 s |
| 0–50 km/h | 3.09 s | 3.39 s |
| 0–80 km/h | 4.95 s | 5.95 s |
| 0–100 km/h | 6.21 s | 8.42 s |
| 0–120 km/h | 7.93 s | 11.64 s |
| 0–160 km/h | 12.59 s | 21.49 s |
| 0–200 km/h | 20.51 s | 43.09 s |
| 400 m standing start | 14.26 s | 16.27 s |
| 1,000 m standing start | 25.30 s | 29.52 s |
| Top speed | 251 km/h | 220 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 163 hp | 4 cyl |
| Torque | 400 Nm | |
| Weight | 1 565 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | Seven-speed Steptronic dual-clutch transmission |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 8.42 s for the 220d Active Tourer. At this point, the John Cooper Works FWD leads by 2.21 s and sits roughly 11 m ahead.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 115 km/h for the 220d Active Tourer. The gap is 1.07 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 16.26 s. The 2.00 s gap represents roughly 77 m of track - a gap visible to the naked eye.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 159 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 29.52 s, with a 4.22 s lead.
Electronically capped at 220 km/h, the 220d Active Tourer never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 9.60 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 13.60 seconds. The 2.21 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 8,42 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. 220d Active Tourer G42: 163 hp, ratio 9,60 kg/hp.
John Cooper Works FWD: 251 km/h. 220d Active Tourer G42: 220 km/h.