Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 7,27 s).
Simulated drag race 0 → 1,000 m in real time. Synchronised speed counters and stopwatch. Physics calibration on 7 manufacturer measurements.
| Measure | John Cooper Works FWD | 220i F44 | Gap |
|---|---|---|---|
| 0–100 km/h | 6.21 s | 7.27 s | 1.06 s · John Cooper Works FWD |
| 400 m standing start | 14.26 s | 15.26 s | 1.00 s · John Cooper Works FWD |
| 1,000 m standing start | 25.30 s | 28.21 s | 2.91 s · John Cooper Works FWD |
| Top speed (electronically limited) | 251 km/h | 225 km/h | 26 km/h · John Cooper Works FWD |
| Power-to-weight ratio | 5.09 kg/hp | 7.95 kg/hp | better ratio · John Cooper Works FWD |
Standing-start drag race, calibrated on manufacturer splits. The gap shows at each stage.
| Stage | John Cooper Works FWD | 220i F44 |
|---|---|---|
| 0–30 km/h | 1.85 s | 1.32 s |
| 0–50 km/h | 3.09 s | 2.38 s |
| 0–80 km/h | 4.95 s | 4.86 s · tight gap |
| 0–100 km/h | 6.21 s | 7.27 s |
| 0–120 km/h | 7.93 s | 10.16 s |
| 0–160 km/h | 12.59 s | 19.19 s |
| 0–200 km/h | 20.51 s | 37.83 s |
| 400 m standing start | 14.26 s | 15.26 s |
| 1,000 m standing start | 25.30 s | 28.21 s |
| Top speed | 251 km/h | 225 km/h |
Physics model calibrated on manufacturer splits. The limited top speed is not the real aerodynamic top speed of the vehicles.
Manufacturer technical specifications. The power-to-weight ratio is the key physical factor in a drag race.
| Characteristic | Value | Detail |
|---|---|---|
| Power | 231 hp | Pending |
| Torque | 320 Nm | |
| Weight | 1 175 kg | manufacturer kerb weight |
| Drivetrain | Traction | |
| Gearbox | 8-speed automatic |
| Characteristic | Value | Detail |
|---|---|---|
| Power | 178 hp | 4 cyl |
| Torque | 280 Nm | |
| Weight | 1 415 kg | manufacturer kerb weight |
| Drivetrain | - | |
| Gearbox | 7-speed Steptronic with double clutch |
Off the line, the John Cooper Works FWD hits 100 km/h in 6.21 s versus 7.27 s for the 220i. Despite the faster sprint time, the 220i is 8 m further along the track at this moment: stronger low-speed acceleration offsets a slower run beyond 100 km/h.
At 200 metres, the John Cooper Works FWD is doing 137 km/h against 118 km/h for the 220i. The gap is 0.18 s. The challenger starts to claw back ground.
At 400 metres standing start, the John Cooper Works FWD crosses the line in 14.26 s versus 15.25 s. The 0.99 s gap represents roughly 39 m of track - a gap visible to the naked eye.
Past 400 metres, the John Cooper Works FWD continues to build its lead. At 600 metres, it runs at 191 km/h versus 162 km/h. At 1,000 metres, the John Cooper Works FWD finishes in 25.29 s versus 28.20 s, with a 2.91 s lead.
Electronically capped at 229 km/h, the 220i never reaches its natural aerodynamic ceiling in this duel. That’s not a physical limit of the motor - it’s a deliberate manufacturer decision, typically tied to standard-fit tyre ratings or model-range positioning.
With two combustion powertrains, the difference comes down to power-to-weight ratio (5.09 kg/hp vs 7.95 kg/hp) and transmission (Automatic vs Automatic).
In European road use (130 km/h max), both vehicles reach the legal speed limit in under 12.15 seconds. The 1.06 s difference in 0 to 100 km/h is mostly felt in motorway merging and overtaking.
Swap one of the two models to explore an equivalent duel in the same segment.
Over 0–100 km/h, John Cooper Works FWD wins (6,21 s vs 7,27 s).
John Cooper Works FWD goes from 0 to 100 km/h in 6,21 seconds (calibrated simulation).
John Cooper Works FWD: 231 hp, ratio 5,09 kg/hp. 220i F44: 178 hp, ratio 7,95 kg/hp.
John Cooper Works FWD: 251 km/h. 220i F44: 225 km/h.